Create Color Arrangements for the pattern example Half Milano with Weft Yarn

Example 1 - 3: Create Color Arrangements for half milano with weft yarn Q and weft yarn presser foot:

Design Pattern is created.

1: Select the desired rows in the Row control column.

2: Position the cursor in the pattern area.

3: Call up the Selection / Create Color Arrangement: context menu.
- or -
Click directly the button in the ribbon.

The Color Arrangement Editor will be opened.

4: Make the desired entries in the editor with the tools for Color Arrangements from the CA and Needle Actions / Colors tabs.

5: Therefore, insert one row above each pattern row into the executing area of the Color Arrangement:

6: Draw in the Rear Stitch needle actions with any desired yarn color, magazine color or yarn carrier color.

7: Define this row as an additional row by Keep reference row number.

8: Draw in the needle actions Front Stitch - Rear Stitch to the existing reference row with the defined plating colors P1, P3 or P5.

9: Make entries to the following control columns:

System:

specify the desired system allocation (not mandatory)

Presser Foot Correction :

Set a different ESCI index for each of both the carriage directions in those technical rows in which the weft yarn presser foot is active.

/ Stitch Lengths

Assign the desired stitch length indexes at front and rear.

Pattern Example 01

with one weft yarn

Pattern Example 02

with two weft yarns

Pattern Example 03

with three weft yarns

10: Check the generated Color Arrangement on correct entries with the Manually button.
: The knitting procedure cannot be checked!

11: If necessary, in case of a Color Arrangement already used in the design pattern, apply the changes to the basic pattern with the Apply button.
- or -
Close the tool window with .

12: Close the prompt with the desired button:

13: Enter the generated Color Arrangement via the control column into the desired rows of the design pattern.

The Color Arrangement is expanded by the technical processing.

Example 4: Generate a Color Arrangement for half milano with weft yarn Q and weft yarn presser foot:

Design Pattern is created with P7 + P8 plating colors.

1: Select the rows and create the Collor Arrangement.

The Color Arrangement Editor will be opened.

2: Make the desired entries in the editor with the tools for Color Arrangements from the CA and Needle Actions / Colors tabs.

3: Therefore, insert one row above each pattern row into the executing area of the Color Arrangement:

4: Draw in the Rear Stitch needle actions with any desired yarn color, magazine color or yarn carrier color.

5: Define this row as an additional row by Keep reference row number.

6: Draw in the needle actions Front Stitch - Rear Stitch to the existing reference row with the defined plating colors P7 and P8.

7: Make entries to the following control columns:

System:

specify the desired system allocation (not mandatory)

Presser Foot Correction :

Set a different ESCI index for each of both the carriage directions in those technical rows in which the weft yarn presser foot is active.

/ Stitch Lengths

Assign the desired stitch length indexes at front and rear.

Pattern Example 04

with one weft yarn and inverse plating

1: Check the generated Color Arrangement on correct entries with the Manually button.
: The knitting procedure cannot be checked!

2: If necessary, in case of a Color Arrangement already used in the design pattern, apply the changes to the basic pattern with the Apply button.
- or -
Close the tool window with .

3: Close the prompt with the desired button:

4: Enter the generated Color Arrangement via the control column into the desired rows of the design pattern.

The Color Arrangement is expanded by the technical processing.