Optional Features

Language Settings Section

Language Selection

Select the language of the user interface.

Use Local Help System

Use local or online help system.

Print Settings Section

Basic Page Layout

Opens the Basic Page Layout dialog box.

Make the basic settings for printing in the dimensioned shape.

Presets for new dimensioned shapes

Measure Units Section

Measure Unit

Select the measure unit.

cm or
inch

Unit-settings of Stitch Density

Enter the reference measure for the stitch density in the set measure unit.

Specifying the Stepping
Hand-Knitting (Courses)

All values for vertical measures will be set in courses, i.e. 2 stitch rows.
The following settings are available for Hand-Knitting (Courses).

Knitting before widening following the start

The stepping of the first widening after the start will be calculated the way that widening to the outside will be done first and then the stitch rows upwards will be knitted.

Widening before knitting following the start

The stepping of the first widening after the start will be calculated the way that the stitch rows upwards will be knitted first and then widening to the outside will be done.

Size Settings Section

Select the system from which the size settings in the dimensioned shape are to be displayed.

Digits (36, 38, 40, ...)

The sizes are indicated in digits.

Capital Letters (S, M, L, ...)

The sizes are indicated in capital letters.

Deviation of Shape Points in the Dimensioning View Section

Measure Unit

Select the measure unit for the calculation of the deviation.

Stitches or
cm

Show with deviation greater than:
Vertical
Horizontal

Enter the measure of the vertical and horizontal deviation after which a display should occur in the shape.

Default Settings

Make the following settings in the Default Settings section:

By drag-and-drop is available to select the module.

Narrowing

Content

Select narrowing module from the offered options or directly from the Knit Explorer.

Width

Set the width of the narrowing.

Look

Select the look for narrowing.

underneath

above

Multi-step Narrowing

Content

Select the module for multi-step narrowing.

Look

Select the look.
underneath or
above

Cover Width

Enter cover width.

Widening

Content

Select widening module.

Width

Enter width of the widening module.

Multi-step Widening

Content

Select the module for multi-step widening.

Binding-off

Content

Select module for the binding-off.

From a Step Width of

Enter the minimum step width requiring binding-off.

Fading-out

The fading-out can be configured differently for Structure / Intarsia and Jacquard.

for structure / Intarsia

Content

Select module for fading-out with Structure and Intarsia.

Width

Enter the width for fading-out.

for Jacquards (float / net)

Content

Select module for fading-out with Jacquards.

Width

Enter the width for fading-out.

Stitch length on shape edge

Rear

Select the stitch length (NP value) for the rear needle bed.

Width

Enter the width of the deviated stitch length in the rear of the shape edge.

Front

Select the stitch length (NP value) for the front needle bed.

Width

Enter the width of the deviated stitch length in the front of the shape edge.