Header of Structure Modules

Verificar automáticamente	Check the structure of the module automatically. The structure module is checked automatically for errors during the drawing. If Verificar automáticamente is switched off, then you have to click manually on Check for Errors. The menus and the error messages are displayed in the selected language. Click on the blue designation of the error message to open the description in the help file. Click on the error message, to select the exact position of the error in the module. If an eye appears in the error message, then the position is additionally marked with a pin. Click on the eye to hide the pin again. If a crossed out eye appears in the error message, then no pin is displayed. Click on the crossed out eye to display the pin.
Verificar	Check the structure of the module manually. If Verificar automáticamente is deactivated, then the possible error messages appear under the header, as soon as you manually click on Verificar.
Pasadas de diseño:: Columnas de control	Aplicar datos de columnas de control a la pasada de diseño . If control column data is already defined for the technical rows, then they are applied to the design rows when activating Columnas de control. If Columnas de control is active, then the control column data is already applied to the design rows when drawing.
Pasadas de diseño:: Selección	Calcular automáticamente los símbolos de diseño en el sector seleccionado. Design symbols can be drawn manually into the module or determined automatically. If they were drawn-in manually, they appear with a grey M in the background. In the selected area, the drawn-in design symbols are replaced by automatically determined design symbols.
Aplicar	Apply modifications to the module to the pattern
	Hide and display the tool windows on the right side