Machine Section

Machine section
	The machine that is active for the knitting program is displayed.
	Call up the Select machine dialog box. You can select another machine to check the knitting program for the desired machine.
Machine Type	Display type of active machine.
EAYSEQ	Enter the EAY command between the sequence elements. If the check box disabled, the S0Y command is entered between the sequence elements. (OKC operating system 1.4)
Gauge	Display gauge of active machine.
Needle hook gauge	Display the needle hook gauge of the active machine.
Needle number	Display needle number of active machine.
	Display computer (central processing unit) used in the active machine.
	Display the coupling width (in inches) of the active machine if it is used in tandem mode.
System Distance	Display the system distance (in inches) of the active machine. 5" Distance of the knitting systems (D5) 5.2” Distance of the knitting systems (D5,2) 6" Distance of the knitting systems (D6) 9” Distance of the knitting systems (D9)

Yarn Carrier Drive sub-section
Type 1	Use the precious intarsia yarn carriers (120 mm)
Type 2	Use the new intarsia yarn carriers (85mm)

Clamping and cutting Positions sub-section
Selection according to the machine:
8/8 --- 8/8	Use the simple number of clamping and cutting positions
16/16 --- 16/16	Use the double number of clamping and cutting positions
16/8 --- 16/8	Use only eight (every second) of the 16 clamping and cutting positions.
0 --- 12/12	Use all of the 12 clamping and cutting points on the right-hand side
0 --- 8/8	Use all of the 8 clamping and cutting points on the right-hand side
Tandem mode with Comb/Clamping and cutting	The setting is automatically made with a pattern for the CMS322TC-M or CMS 822. : Only available with CMS322TC-M or CMS 822.