General settings

The following specifications serve only as information about the yarn type.
It has no effect on the visual presentation of the yarn in the fabric view.

Nombre

Enter a name for the yarn.

Composición

Describe the composition of the yarn.

Fabricante

Enter the manufacturer of the yarn.

Comentario

Enter a comment.

Grosor del hilo

Enter the yarn thickness and the corresponding unit of measure.

The following specifications serve the visual presentation of the yarn in the fabric view:

Torsión

Enter the twist and the direction of the twist (S or Z).

The larger the value the stronger is the yarn twisted.
Maximum: 200

Geometría de mallas

Select the stitch geometry between Version 1 and Version 2.

  • Version 1:
    • Activate Geometría de mallas uniforme .
    • - or -
    • Specify the specific stitch geometry at the needle loop, needle legs and transition, both inside and outside.
  • Version 2:
    • Geometría de mallas uniforme is active automatically.
    • Specify the core geometry.

Geometría de mallas en %

The stitch geometry determines the yarn thickness.
This value affects the entire stitch uniformly.
Maximum: 300

  • If Geometría de mallas uniforme is switched off, then the yarn thickness can be defined differently for the different areas of the stitch.
  • But if the Geometría de mallas en % value is modified after, then all areas are adapted to this value.

Geometría de mallas uniforme

The Geometría de mallas en % value affects the entire stitch uniformly.

Only available with Geometría de mallas Version 1.

Geometría de mallas uniforme

The yarn thickness can be defined differently for the following areas of the stitch:

Only available with Geometría de mallas Version 1.

Cabeza de la malla, centro, fuera

Enter the yarn thickness for this area

Maximum: 300

Cabeza de la malla, centro, dentro

Enter the yarn thickness for this area

Maximum: 300

Transición, pierna a cabeza, fuera

Enter the yarn thickness for this area

Maximum: 300

Transición, pierna a cabeza, dentro

Enter the yarn thickness for this area

Maximum: 300

Pierna de la malla, centro, fuera

Enter the yarn thickness for this area

Maximum: 300

Pierna de la malla, centro, dentro

Enter the yarn thickness for this area

Maximum: 300

Geometría de núcleo en %

The core geometry does not determine the yarn thickness, but the route of the yarn in the stitch.

  • With 0%, the yarns of the stitches run overlapping.
  • With 100% (maximum value), they run side by side.

Colocación de hilo

Specify the arrangement of the threads by Manualmente or Automático:

  • Manualmente
    You can move and position the presentation of the yarns in Sección transversal del hilo as desired.
  • Automático
    The yarns are displayed evenly side by side.
    The selection between Uniforme and en secuencia is offered.
    • Uniforme
      The individual threads of the yarns are displayed alternately.
    • en secuencia
      The individual threads of the yarns are displayed connected.

A difference between Uniforme or en secuencia is only recognizable if the individual yarns are multithreaded.

Utilizar colores de vista previa


  • The colored presentation of the Textura de hilo corresponds to the preview colors form the Sección transversal del hilo.

  • The colored presentation of the Textura de hilo corresponds to the color defined in the preview.