Table entries (shape markings)

You make the following settings on the table of the Marcas de forma tool window:

ID	Organizar la columna de índices
	Muestra la selección para fontura. Con CTRL usted toma más valores, también de otras tablas en el cursor.
Color	Displays the marking color Via the drop-down menu you open the dialog box Colors in which you can select your own color. Change Color Value
Ancla	Ancla de esta marca The anchor of a marking is a corner point of the knitting element that you can select freely: Arriba a la izquierda Arriba a la derecha Abajo a la izquierda Abajo a la derecha The stitches with red border in the image represent four possibilities. Distancia X and Distancia Y relate to the horizontal and the vertical distance each in stitches, from the marking point to the defined anchor in the knitting element. Thus, the position of the knitting element regarding the marking point is clearly determined. In the example image, the anchor is set to Abajo a la izquierda.
Contenido	Elemento de tisaje de esta marca Select the knitting element in the drop-down menu that you want to insert using the marking in the raster shape. Database modules and local modules are offered for direct selection. You can also select a different directory, from which the modules are offered. By drag-and-drop is possible. Open the selected module via the context menu.
Distancia X	Offset X de esta marca See image above.
Distancia Y	Offset Y de esta marca See image above.
Capa Z	Capa Z de esta marca It might happen that various knitting elements are inserted in the pattern using the markings and that they overlap. In that case you can define using the Capa Z which knitting element lies on top and thus overwrites the others. The knitting element with higher number lies over the knitting element with lower number.