Pattern 14: DJ, Front with V-neck

Máquina

• As desired
• Example for CMS 530 HP,E3,5.2 (classification 656)

Without Intarsia

With intarsia

• Técnica de tisaje
• Todas las agujas
• Elementos de relleno
• Any yarn color
• Malla delante con transferencia
• Comienzo
• Comienzo, tubular :
• 1 sistema
• Sin hilo elástico
• Con hilo de protección
• DJ

Proyecto de muestra

Pattern-14.spf

Proyecto de corte de líneas

Create private lined shape in Proyecto de muestra

• Create new lined shape:
• Nuevo proyecto de corte de líneas
• different variants of fading-out at the shape edge of DJ fabrics
• Pattern-14A:
• Toggle off with Malla delante con transferencia
  Narrowing width 1 needle
• Pattern-14AA:
• Toggle off with Malla delante con transferencia
  Narrowing width 8 needles
• Pattern-14B:
• Fading-out with Canto DJ knitting element
  Narrowing width 1 needle
• Pattern-14C:
• Fading-out with Canto enrollado knitting element
  Narrowing width 1 needle
• Pattern-14D:
• With intarsia
• Fading-out with Canto DJ knitting element
  Narrowing width 8 needles

1. Create a pattern project with one pattern.
2. Create private shape as lined shape in the pattern project
3. Position private shape in the basic pattern.
4. Start the Technical Processing.
5. Generate knitting program.
   Sintral, Jacquard, Setup
6. Run the Sintral Check.
7. Load and set up the knitting program on the machine.