Optional Features

Ajustes de idioma Section

Selección de idioma

Select the language of the user interface.

Utilizar el sistema de ayuda local

Use local or online help system.

Ajustes de impresión Section

Diseño de página básico

Opens the Basic Page Layout dialog box.

Make the basic settings for printing in the dimensioned shape.

Especificaciones para nuevos cortes de dimensiones

Unidades de medida Section

Unidad de medida

Select the measure unit.

cm or
Pulgadas

Unidad de referencia para las densidades de las mallas

Enter the reference measure for the stitch density in the set measure unit.

Especificación del escalonamiento
Tisaje a mano (vueltas)

All values for vertical measures will be set in courses, i.e. 2 stitch rows.
The following settings are available for Tisaje a mano (vueltas).

Tejer antes de aumentar después del comienzo

The stepping of the first widening after the start will be calculated the way that widening to the outside will be done first and then the stitch rows upwards will be knitted.

Aumentar antes de tejer después del comienzo

The stepping of the first widening after the start will be calculated the way that the stitch rows upwards will be knitted first and then widening to the outside will be done.

Indicaciones de tamaño Section

Select the system from which the size settings in the dimensioned shape are to be displayed.

Cifras (36, 38, 40, ...)

The sizes are indicated in digits.

Mayúscula (S, M, L, ...)

The sizes are indicated in capital letters.

Desviaciones de los puntos de corte en la vista de dimensionamiento Section

Unidad de medida

Select the measure unit for the calculation of the deviation.

Mallas or
cm

Mostrar a partir de una desviación de:
Vertical
Horizontal

Enter the measure of the vertical and horizontal deviation after which a display should occur in the shape.

Configuración predeterminada

Make the following settings in the Configuración predeterminada section:

By drag-and-drop is available to select the module.

Menguar

Contenido

Select narrowing module from the offered options or directly from the Knit Explorer.

Anchura:

Set the width of the narrowing.

Aspecto

Select the look for narrowing.

Infrapuesto

Sobrepuesto

Menguado en varios pasos

Contenido

Select the module for multi-step narrowing.

Aspecto

Select the look.
Infrapuesto or
Sobrepuesto

Anchura de superposición

Enter cover width.

Aumentar

Contenido

Select widening module.

Anchura:

Enter width of the widening module.

Aumentar en varios pasos

Contenido

Select the module for multi-step widening.

Remallar

Contenido

Select module for the binding-off.

A partir de anchura de paso

Enter the minimum step width requiring binding-off.

Ocultar

The fading-out can be configured differently for Structure / Intarsia and Jacquard.

Para Estructura / Intarsia

Contenido

Select module for fading-out with Structure and Intarsia.

Anchura:

Enter the width for fading-out.

para Jacquards (flotante / red)

Contenido

Select module for fading-out with Jacquards.

Anchura:

Enter the width for fading-out.

Longitud de malla en el borde de forma

Posterior

Select the stitch length (NP value) for the rear needle bed.

Anchura:

Enter the width of the deviated stitch length in the rear of the shape edge.

Anterior

Select the stitch length (NP value) for the front needle bed.

Anchura:

Enter the width of the deviated stitch length in the front of the shape edge.