Multi-piece knitting on machines with and without comb

Rules for two-piece knitting with comb:

For the start Utiliser un peigne (tout au long du projet) is to be selected.
Do not use width cycles within the pattern
Consider the total width and the distance between the fabrics
The pattern must have a start

Create two piece pattern:

1: Generate new pattern.
- or -
Load the existing pattern as basic pattern.

2: In the tool window Configuration select the tab Zones de tricotage .

3: Select Tricotage à plusieurs pièces and enter the distance to the fabric piece center or the distance of the empty space.
Multi-piece Knitting (Knitting Areas Tab)

4: The Élaboration technique generates data for both fabric pieces automatically.

You can set the yarn carrier allocation in the Vue Guide-fils by yourself. Otherwise they are positioned and inserted automatically.

Yarn carriers for the left fabric piece on the left side of the machine
Yarn carriers for the right fabric piece on the right-hand side of the machine.
Exception:
The yarn carrier for the comb thread is used for both pieces.

Rules for two-piece knitting without comb:

Utiliser un peigne (tout au long du projet) is disabled for the start.
Consider the total width and the distance between the fabrics
The pattern must have a start

Create two piece pattern:

1: Generate new pattern.
- or -
Load the existing pattern as basic pattern.

2: In the tool window Configuration select the tab Zones de tricotage .

3: Enter the number of SEN areas and the distance between them in the SEN section.
SEN (Knitting Areas Tab)

4: The Élaboration technique generates data for both fabric pieces automatically.

You can set the yarn carrier allocation for the SEN areas in the Vue Guide-fils by yourself. Otherwise they are positioned and inserted automatically.