|
Insert a multiple copy of a module
|
- Select the module (e.g. Aran 2x1).
- Set the quantity of Copies (e.g. 5).
- Set the Décalage X (e.g. 1) and the Décalage Y (e.g. 2).
- Click the module into the pattern.
- The multi copy appears.
|
|
Change a multi copy in the pattern
|
- You can change the number of copies and the offset in the pattern as well.
- Clicking on a numbered module copy will cause the quantity of copies to adapt exactly to this value.
- Clicking and dragging a module copy will change the offset values.
- Click
 Accepter or hit the ENTER key in order to insert the module into the pattern.
|
|
Accepter et continuer
|
- After making the settings to a multiple copy, you can apply them also to the pattern also by Accepter et continuer.
- Then, at the end of the multiple copy, another repetition is available to you for editing.
|
|
 Déplacer les éléments manuellement
|
- Select Déplacer les éléments manuellement if you want to move individual modules of the copy.
- Click on the module and drag it to the desired new position.
- Click Accepter or hit the ENTER key in order to insert the module into the pattern.
|
|
Resume copying the entire area
|
- After applying the module to the pattern, the frame of the modules will remain.
- You can move the frame with the modules and reposition it in the pattern.
- Click Accepter or hit the ENTERkey in order to insert the module into the pattern again.
|
|
Extérieur de la forme
Vers la gauche
|
- Set the area at the left or right of the modules (e.g. Vers la gauche) with Multi-Copy to Extérieur de la forme.
|