Optional Features

Paramètres de langue Section

Language Selection

Select the language of the user interface.

Utiliser un système d'aide local

Use local or online help system.

Configuration de l'imprimante Section

Mise en page de base

Opens the Basic Page Layout dialog box.

Make the basic settings for printing in the dimensioned shape.

Valeurs prédéfinies pour les nouvelles coupes à dimension !

Unités de mesure Section

Unité de mesure

Select the measure unit.

cm or
Pouces

Unité de référence pour la densité des mailles

Enter the reference measure for the stitch density in the set measure unit.

Indication de la gradation
Tricot main (tours)

All values for vertical measures will be set in courses, i.e. 2 stitch rows.
The following settings are available for Tricot main (tours).

Tricoter avant Augmenter après le début

The stepping of the first widening after the start will be calculated the way that widening to the outside will be done first and then the stitch rows upwards will be knitted.

Augmenter avant Tricoter après le début

The stepping of the first widening after the start will be calculated the way that the stitch rows upwards will be knitted first and then widening to the outside will be done.

Indications de tailles Section

Select the system from which the size settings in the dimensioned shape are to be displayed.

Chiffres (36, 38, 40, ...)

The sizes are indicated in digits.

Majuscules (S, M, L, ...)

The sizes are indicated in capital letters.

Différences de point de coupe dans la vue de dimension Section

Unité de mesure

Select the measure unit for the calculation of the deviation.

Stitches or
cm

Afficher une différence de :
vertical
horizontal

Enter the measure of the vertical and horizontal deviation after which a display should occur in the shape.

Valeurs prédéfinies par défaut

Make the following settings in the Valeurs prédéfinies par défaut section:

By drag-and-drop is available to select the module.

Diminuer

Contenu

Select narrowing module from the offered options or directly from the Knit Explorer.

Largeur

Set the width of the narrowing.

Aspect

Select the look for narrowing.

en dessous

au-dessus

Diminution à plusieurs niveaux

Contenu

Select the module for multi-step narrowing.

Aspect

Select the look.
en dessous or
au-dessus

Largeur de rapprochement

Enter cover width.

Augmenter

Contenu

Select widening module.

Largeur

Enter width of the widening module.

Augmentation à escaliers

Contenu

Select the module for multi-step widening.

Chaînette

Contenu

Select module for the binding-off.

À partir de la largeur de gradation

Enter the minimum step width requiring binding-off.

Masquer

The fading-out can be configured differently for Structure / Intarsia and Jacquard.

pour structure / intarsia

Contenu

Select module for fading-out with Structure and Intarsia.

Largeur

Enter the width for fading-out.

Pour Jacquards (flottage / réseau)

Contenu

Select module for fading-out with Jacquards.

Largeur

Enter the width for fading-out.

Longueur de la maille au bord de la forme

Derrière

Select the stitch length (NP value) for the rear needle bed.

Largeur

Enter the width of the deviated stitch length in the rear of the shape edge.

Devant

Select the stitch length (NP value) for the front needle bed.

Largeur

Enter the width of the deviated stitch length in the front of the shape edge.