General settings

The following specifications serve only as information about the yarn type.
It has no effect on the visual presentation of the yarn in the fabric view.

Nome

Enter a name for the yarn.

Composizione

Describe the composition of the yarn.

Produttore

Enter the manufacturer of the yarn.

Commento

Enter a comment.

Spessore del filato

Enter the yarn thickness and the corresponding unit of measure.

The following specifications serve the visual presentation of the yarn in the fabric view:

Rotazione

Enter the twist and the direction of the twist (S or Z).

The larger the value the stronger is the yarn twisted.
Maximum: 200

Geometria della maglia

Select the stitch geometry between Version 1 and Version 2.

  • Version 1:
    • Activate Geometria uniforme della maglia .
    • - or -
    • Specify the specific stitch geometry at the needle loop, needle legs and transition, both inside and outside.
  • Version 2:
    • Geometria uniforme della maglia is active automatically.
    • Specify the core geometry.

Geometria della maglia in %

The stitch geometry determines the yarn thickness.
This value affects the entire stitch uniformly.
Maximum: 300

  • If Geometria uniforme della maglia is switched off, then the yarn thickness can be defined differently for the different areas of the stitch.
  • But if the Geometria della maglia in % value is modified after, then all areas are adapted to this value.

Geometria uniforme della maglia

The Geometria della maglia in % value affects the entire stitch uniformly.

Only available with Geometria della maglia Version 1.

Geometria uniforme della maglia

The yarn thickness can be defined differently for the following areas of the stitch:

Only available with Geometria della maglia Version 1.

Testa della maglia, al centro, fuori

Enter the yarn thickness for this area

Maximum: 300

Testa della maglia, al centro, dentro

Enter the yarn thickness for this area

Maximum: 300

Transizione, coscia alla testa, fuori

Enter the yarn thickness for this area

Maximum: 300

Transizione, coscia alla testa, dentro

Enter the yarn thickness for this area

Maximum: 300

Coscia della maglia, al centro, fuori

Enter the yarn thickness for this area

Maximum: 300

Coscia della maglia, al centro, dentro

Enter the yarn thickness for this area

Maximum: 300

Geometria di base in %

The core geometry does not determine the yarn thickness, but the route of the yarn in the stitch.

  • With 0%, the yarns of the stitches run overlapping.
  • With 100% (maximum value), they run side by side.

Disposizione di fili

Specify the arrangement of the threads by Manuale or Automatico:

  • Manuale
    You can move and position the presentation of the yarns in Sezione trasversale dei filati as desired.
  • Automatico
    The yarns are displayed evenly side by side.
    The selection between Uniforme and In sequenza is offered.
    • Uniforme
      The individual threads of the yarns are displayed alternately.
    • In sequenza
      The individual threads of the yarns are displayed connected.

A difference between Uniforme or In sequenza is only recognizable if the individual yarns are multithreaded.

Utilizza colori di anteprima


  • The colored presentation of the Trama del filato corresponds to the preview colors form the Sezione trasversale dei filati.

  • The colored presentation of the Trama del filato corresponds to the color defined in the preview.