Optional Features

Impostazioni lingua Section

Selezione della lingua

Select the language of the user interface.

Ricorrere al sistema di guida locale

Use local or online help system.

Impostazioni di stampa Section

Layout di pagina di base

Opens the Basic Page Layout dialog box.

Make the basic settings for printing in the dimensioned shape.

Assegnazioni preliminari per nuovi tagli di dimensionamento

Unità di misura Section

Unità di misura

Select the measure unit.

cm or
Pollici

Misura di riferimento per densità maglie

Enter the reference measure for the stitch density in the set measure unit.

Indicazione per scalatura
Lavorazione a mano (giri)

All values for vertical measures will be set in courses, i.e. 2 stitch rows.
The following settings are available for Lavorazione a mano (giri).

Lavorazione prima dell'aumento dopo l'inizio

The stepping of the first widening after the start will be calculated the way that widening to the outside will be done first and then the stitch rows upwards will be knitted.

Aumento prima della lavorazione dopo l'inizio

The stepping of the first widening after the start will be calculated the way that the stitch rows upwards will be knitted first and then widening to the outside will be done.

Indicazioni della grandezza Section

Select the system from which the size settings in the dimensioned shape are to be displayed.

Cifre (36, 38, 40, ...)

The sizes are indicated in digits.

Maiuscole (S, M, L, ...)

The sizes are indicated in capital letters.

Differenze tra i punti di taglio nella vista di dimensionamento Section

Unità di misura

Select the measure unit for the calculation of the deviation.

Maglie or
cm

Visualizza a partire da una differenza di:
Verticale
Orizzontale

Enter the measure of the vertical and horizontal deviation after which a display should occur in the shape.

Impostazioni standard

Make the following settings in the Impostazioni standard section:

By drag-and-drop is available to select the module.

Diminuzione

Contenuto

Select narrowing module from the offered options or directly from the Knit Explorer.

Larghezza

Set the width of the narrowing.

Aspetto

Select the look for narrowing.

sottostante

sovrapposto

Diminuzione a parecchi stadi

Contenuto

Select the module for multi-step narrowing.

Aspetto

Select the look.
sottostante or
sovrapposto

Ampiezza di copertura

Enter cover width.

Aumento

Contenuto

Select widening module.

Larghezza

Enter width of the widening module.

Aumento a più gradini

Contenuto

Select the module for multi-step widening.

Rimagliatura

Contenuto

Select module for the binding-off.

A partire da larghezza graduale

Enter the minimum step width requiring binding-off.

Dissolvenza

The fading-out can be configured differently for Structure / Intarsia and Jacquard.

Per struttura / intarsio

Contenuto

Select module for fading-out with Structure and Intarsia.

Larghezza

Enter the width for fading-out.

Per Jacquard (flottante / rete)

Contenuto

Select module for fading-out with Jacquards.

Larghezza

Enter the width for fading-out.

Lunghezza della maglia sulla cimosa della forma

Dietro

Select the stitch length (NP value) for the rear needle bed.

Larghezza

Enter the width of the deviated stitch length in the rear of the shape edge.

Davanti

Select the stitch length (NP value) for the front needle bed.

Larghezza

Enter the width of the deviated stitch length in the front of the shape edge.