Correction Values

For every entry of the upper table, enter the desired correction value for the yarn carrier in this table.

Y

Guia-fios (1-8, 1A-8D)

Ka

Valor de correção de guia-fios (esquerda) para guia-fios não basculado se o guia-fios for parado dentro do tecido.

Value range: -120 to 120
Step width: 0.5=1/32 inch=0.8 mm

Kb

Valor de correção de guia-fios (direita) para guia-fios não basculado se o guia-fios for parado dentro do tecido.

Value range: -120 to 120
Step width: 0.5=1/32 inch=0.8 mm

K<I>a

Valor de correção de guia-fios (esquerda) para guia-fios basculado.

Value range: -120 to 120
Step width: 0.5=1/32 inch=0.8 mm

K<I>b

Valor de correção de guia-fios (direita) para guia-fios basculado.

Value range: -120 to 120
Step width: 0.5=1/32 inch=0.8 mm

MSEC

Velocidade do carro se for utilizado este guia-fios.

Especially helpful for technical fabrics.

V

Velocidade do carro reduzida desde a inversão do carro até alcançar a área de aplicação do guia-fios.

Reduce carriage speed (n) for yarn carrier (n = 0..3). The speed is reduced to 75% from carriage reversal point until achievement of the operating range of the yarn carrier. Then it can be chosen between the following possibilities:

  • 1 = Acceleration up to 100%
  • 2 = Braking down to 50%, maintain speed over a fabric width of 2 inches, acceleration up to 100%
  • 3 = Braking down to 50%, maintain speed over a fabric width of 5 inches, acceleration up to 100%
  • 0 = Deactivation of yarn carrier-specific carriage speed

F

Acompanhamento de guia-fios automático e independente do sistema na ourela de tecido

Activate or deactivate the function for the automatic tracking of the yarn carriers in case of shapings.

If the distance between the yarn carrier and the fabric selvedge deviates, the yarn carriers will be moved automatically following the fabric selvedge.

Basis: YDF value of Yarn Carrier Distance from the Fabric Selvedge (YD)

  • Activate the automatic tracking (default setting)
  • Deactivate the automatic tracking
  • For pattern specific subentries:
    • No specification (= Don’t Care)
      Apply value from the previous row.
      The applied value will not be displayed.
    • Call-up the Limpar conteúdo context menu or tap the Del button.