Settings for Yarn Carriers

Marcar como utilizado

The yarn carrier is added even though it is not used in the pattern (for example for sequences).

• The yarn carrier appears in the yarn carrier home position (YG) in Sintral.
• The yarn carrier can be used for Sintral functions.

Posição

Shows the starting position of the corresponding yarn carrier.

Tipo

Select yarn carrier type

Only yarn carrier types of the selected machine are available.

Automático

The yarn carrier type is determined by the technical processing.

Normal

Normal yarn carrier

Intarsia 1

Intarsia Yarn Carrier Type 1

Intarsia 2

Intarsia Yarn Carrier Type 2

Arco duplo

Plating with a yarn carrier with two bows for plating yarn and basic yarn with adjustable distance.

Ilhó duplo

Common plating yarn carrier for plating yarn and basic yarn with fixed distance.

Largura da hendedura variável +/- (Ua/b)

Plating with two yarn carriers

• Following basic yarn in the plating yarn carrier type U+/- with Ua/b > 29 mm.
• Leading plating yarn in the normal yarn carrier.

Normal 2 +/- (Ua/b)

Use normal yarn carriers type2.

• For the combination with intarsia yarn carrier type 1 or type 2.
  
• You can change the yarn carrier engaging width for plating.
• Example:
  Following basic yarn with Ua/b > 29 mm

Fio de trama Qw

Weft yarn carrier

• W Machine - Weft Yarn Carrier Qw

Weft Yarn Qt1

Weft yarn carrier with a driving width of 141mm.

• W Machine - Weft Yarn Carriers Qt1 Qt2 Qt3

The driving width can be modified in the same dialog box further down.

Weft Yarn Qt2

Weft yarn carrier with a driving width of 161mm.

• W Machine - Weft Yarn Carriers Qt1 Qt2 Qt3

The driving width can be modified in the same dialog box further down.

Weft Yarn Qt3

Weft yarn carrier with a driving width of 180mm.

• W Machine - Weft Yarn Carriers Qt1 Qt2 Qt3

The driving width can be modified in the same dialog box further down.

Autárquico

Yarn carrier of the ADF machines

Descrição

Enter the description for the selected yarn carrier.

Cor de amostra (após expandir)

Shows the pattern color of the selected yarn carrier.

Cor técnica

Shows the assigned technique color.

Profun. pinç. (NCC)

Depending on the yarn, a correction value (NCC) for sinking the clamping needle may be useful in order to clamp of cut it properly. Highest Position: -10 Lowest Position: 10

Example:

• For a thin or elastic yarn, it may be necessary to withdraw the clamping and cutting needle deeper in order to ensure reliable clamping and cutting.
• Sink the clamping and cutting needle by 5 steps deeper: NCC=5.

Value range:

• Default Setting: 0
• Highest Position: -10
  For coarse and less tear-resistant yarns
• Lowest Position: 10
  For fine and elastic yarns

The yarn carrier is knit-in using the Inserir Entrar tecendo antes de começo function.

• The setting is applied from the Pente, pinças tab of the Configuração dialog box.
• The setting can only be modified, if you selected the Livremente definível (em ocupação dos guia-fios) option in the Pente, pinças tab of the Configuração dialog box.
• Comb, Clamping tab

Entrar tecendo no lado oposto

The yarn carrier is knit-in on the opposite side of its home position.

• The setting is only available, if Detect Knitting-in to Opposite Side Automatically is disabled in the Outras configurações tab of the Configuração dialog box.
• Further Settings tab

Recommendation:
Useful for machines with single-sided clamping and cutting or if a yarn carrier in the pattern knits-in on one side and knits-out on the other.

Parar em:

Stop the yarn carriers at the Canto de forma or Ourela SEN.

Valor de ação de guia-fios [mm]

When selecting the Largura da hendedura variável +/- (Ua/b) or Normal 2 +/- (Ua/b) yarn carrier type, the engaging width for left and right can be entered.

Á esquerda (Ua)

Engaging width for the carriage direction to the left

Á direita (Ub)

Engaging width for the carriage direction to the right

Largura de caixa [mm]

Shows the cabinet width of the selected yarn carrier type.

The driving width is displayed for the weft yarn carriers Qw, Qt1, Qt2 and Qt3.

• W Machine - Weft Yarn Carrier Qw
• W Machine - Weft Yarn Carriers Qt1 Qt2 Qt3

Driving Width [mm]

Distância de arrasto do guia-fios na introdução do fio de trama em mm

The driving width can be modified for the Fio de trama Qw yarn carrier type.

• W Machine - Weft Yarn Carrier Qw
• W Machine - Weft Yarn Carriers Qt1 Qt2 Qt3

Fixação da ourela

Select the module for the border fixation.

For machines with belt take-down, the border fixation is enabled by default.

Distância mínima

Enter the quantity of rows after which the upright thread is to be fixed.
Value range: 1-999

With a high gauge the value should be low, with a fine gauge correspondingly higher.

Flutuar transição de Fully Fashion

 At the fabric end, the yarn carrier is moved to the home position by float.
Use case: The weft yarn is too thick for the needle hook gauge.

 At the fabric end, the yarn carrier is moved to the home position according to the setting in the Yarn Field Allocation.

The option takes effect on ff-trans-2_B and Float and Lock.

Para o canto de forma depois de EAY/S0Y (YG:nF)

The yarn carrier will be positioned at the #L and #R counters and follows the shape, with an activated check box.

Excetuar de 'Abrir pinça' (Y-RALL( n ))

The yarn carrier remains clamped despite Y-RALL, with an activated check box.

• Activate in case that threads of individual yarn carriers wind around the take-down roller.
• You control the releasing of the clamp with the entry of Abrir pinça depois de n fileiras: in the Abrir pinça column of the Parâmetros de cor table.
• Color Parameters
• Yarn Carrier Presettings

Not for BMS!

Exclude from Clamping (YG:n!;)

With the check box enabled, the yarn carrier will not be clamped but moved to the '!' position.

Only ADF!

Alimentadores

If working with feed wheels is activated in the machine attributes, you can assign a group to the selected yarn carrier here.

The creating and managing of the groups takes place in the Agrupar alimentadores tab

• Group Feed Wheels Tab

Grupo

Assign a feed wheel group to the yarn carrier.
All groups previously created in the Agrupar alimentadores tab are available for selection.

Tipo

Shows the feed wheel type of the selected group.

You set the feed wheel type in the Agrupar alimentadores tab.

YLC

With Controle do comprimento do fio enabled in Configuração -> Outras configurações, you can assign the corresponding measuring wheel to each yarn carrier.

• Further Settings tab

Roda de medição

Select the corresponding measuring wheel for the yarn carrier.