Technical Design Modules

Módulos técnica de desenho

A Módulo técnico de desenho is a knitting element that is entered into the pattern by the technical processing or through specific dialog boxes according to specified processing rules.

Módulos técnica de desenho contain design rows besides the technical rows, that are entered in the pattern.
This way the module is not only inserted between the pattern rows, but overwrites a corresponding area in the pattern.

Módulos técnica de desenho cannot be drawn-in manually into the pattern.

A Módulo técnico de desenho consists of tiles that are applied in specific situations.

Each tile consists of a search area and a processing area.
The search area contains the specifications to be searched for in the pattern.
The processing area contains the structure that is to be applied in the pattern.

The clear identification of a technical design module can be found in the properties of the knitting element under Tipo de elemento de tricotagem . You can define and modify the Subtipo do elemento de tricotagem but not the specification of the knitting element type.

Structure of a technical design module

Click on the red-framed areas of the image to access the description directly.

1

Header

In the header you can check the Módulo técnico de desenho and make the following settings:

2

Editing area

In the editing area the Módulo técnico de desenho is displayed and edited. For it, there are different alternatives available in the status bar, in the tool windows and through the context menu.

You have access to the following settings and functions in the context menu of the module:

3

Status Bar

The status bar contains cursor indications and options for the presentation in the Módulo técnico de desenho.

4

Symbols to draw in the Módulo técnico de desenho

At the right selvedge you can find the Controle, Desenho and Ações da agulha / Cores tool windows

Application

1

Create a Módulo técnico de desenho.

To generate a new Módulo técnico de desenho there are two ways:

  • Duplicate and then edit an existing module.

- or –

  • Generate a module.

With technical modules it is recommended to modify an existing module to save time and effort.

However, if you want to create a new module, then proceed as follows:

Open the Novo elemento de tricotagem dialog box, select Módulo técnico de desenho and then draw the module.

2

Examples:

3

For that also see: