Settings for Yarn Carriers

Kullanıldı olarak işaretle

The yarn carrier is added even though it is not used in the pattern (for example for sequences).

• The yarn carrier appears in the yarn carrier home position (YG) in Sintral.
• The yarn carrier can be used for Sintral functions.

Pozisyon

Shows the starting position of the corresponding yarn carrier.

Tipi

Select yarn carrier type

Only yarn carrier types of the selected machine are available.

Otomatik

The yarn carrier type is determined by the technical processing.

Normal

Normal yarn carrier

İntersiya 1

Intarsia Yarn Carrier Type 1

İntersiya 2

Intarsia Yarn Carrier Type 2

Çift Kol

Plating with a yarn carrier with two bows for plating yarn and basic yarn with adjustable distance.

Çift Göz

Common plating yarn carrier for plating yarn and basic yarn with fixed distance.

Değişken yakalama mesafesi +/- (Ua/b)

Plating with two yarn carriers

• Following basic yarn in the plating yarn carrier type U+/- with Ua/b > 29 mm.
• Leading plating yarn in the normal yarn carrier.

Normal 2 +/- (Ua/b)

Use normal yarn carriers type2.

• For the combination with intarsia yarn carrier type 1 or type 2.
  
• You can change the yarn carrier engaging width for plating.
• Example:
  Following basic yarn with Ua/b > 29 mm

Atkı ipliği Qw

Weft yarn carrier

• W Machine - Weft Yarn Carrier Qw

Weft Yarn Qt1

Weft yarn carrier with a driving width of 141mm.

• W Machine - Weft Yarn Carriers Qt1 Qt2 Qt3

The driving width can be modified in the same dialog box further down.

Weft Yarn Qt2

Weft yarn carrier with a driving width of 161mm.

• W Machine - Weft Yarn Carriers Qt1 Qt2 Qt3

The driving width can be modified in the same dialog box further down.

Weft Yarn Qt3

Weft yarn carrier with a driving width of 180mm.

• W Machine - Weft Yarn Carriers Qt1 Qt2 Qt3

The driving width can be modified in the same dialog box further down.

Bağımsız

Yarn carrier of the ADF machines

Açıklama

Enter the description for the selected yarn carrier.

Desen rengi (genişlettikten sonra)

Shows the pattern color of the selected yarn carrier.

Teknik rengi

Shows the assigned technique color.

Tutma derinliği (NCC)

İpliğe bağlı olarak, güvenli bir şekilde tutulabilmesi için tutma iğnesinin kumaş çekimi için (NCC) düzeltme değeri girilebilir.

Example:

• For a thin or elastic yarn, it may be necessary to withdraw the clamping and cutting needle deeper in order to ensure reliable clamping and cutting.
• Sink the clamping and cutting needle by 5 steps deeper: NCC=5.

Value range:

• Default Setting: 0
• Highest Position: -10
  For coarse and less tear-resistant yarns
• Lowest Position: 10
  For fine and elastic yarns

The yarn carrier is knit-in using the Başlangıçtan önce örgüye giriş kullan function.

• The setting is applied from the Tarak, Tutma tab of the Yapılandırma dialog box.
• The setting can only be modified, if you selected the Serbest tanımlanabilir (mekik dağılımında) option in the Tarak, Tutma tab of the Yapılandırma dialog box.
• Comb, Clamping tab

Karşı yönden örgüye gir

The yarn carrier is knit-in on the opposite side of its home position.

• The setting is only available, if Detect Knitting-in to Opposite Side Automatically is disabled in the Diğer ayarlar tab of the Yapılandırma dialog box.
• Further Settings tab

Recommendation:
Useful for machines with single-sided clamping and cutting or if a yarn carrier in the pattern knits-in on one side and knits-out on the other.

Bırakma noktası:

Stop the yarn carriers at the Şekil kenarı or SEN kenarı.

Çekiş değeri [mm]

When selecting the Değişken yakalama mesafesi +/- (Ua/b) or Normal 2 +/- (Ua/b) yarn carrier type, the engaging width for left and right can be entered.

Sol (Ua)

Engaging width for the carriage direction to the left

Sağ (Ub)

Engaging width for the carriage direction to the right

Takoz eni [mm]

Shows the cabinet width of the selected yarn carrier type.

The driving width is displayed for the weft yarn carriers Qw, Qt1, Qt2 and Qt3.

• W Machine - Weft Yarn Carrier Qw
• W Machine - Weft Yarn Carriers Qt1 Qt2 Qt3

Driving Width [mm]

Atkı ipliği yatırımında mekik itme genişliği mm

The driving width can be modified for the Atkı ipliği Qw yarn carrier type.

• W Machine - Weft Yarn Carrier Qw
• W Machine - Weft Yarn Carriers Qt1 Qt2 Qt3

Kenar sabitleme

Select the module for the border fixation.

For machines with belt take-down, the border fixation is enabled by default.

Minimum mesafe

Enter the quantity of rows after which the upright thread is to be fixed.
Value range: 1-999

With a high gauge the value should be low, with a fine gauge correspondingly higher.

Fully Fashion geçini atla

 At the fabric end, the yarn carrier is moved to the home position by float.
Use case: The weft yarn is too thick for the needle hook gauge.

 At the fabric end, the yarn carrier is moved to the home position according to the setting in the Yarn Field Allocation.

The option takes effect on ff-trans-2_B and Atla ve Kilitle (Float and Lock).

EAY/S0Y sonrasında şekil kenarına (YG:nF)

The yarn carrier will be positioned at the #L and #R counters and follows the shape, with an activated check box.

'Tutucuyu aç''tan çıkart (Y-RALL( n ))

The yarn carrier remains clamped despite Y-RALL, with an activated check box.

• Activate in case that threads of individual yarn carriers wind around the take-down roller.
• You control the releasing of the clamp with the entry of n sıra sonra tutucuyu aç: in the Tutucuyu aç column of the Renk parametreleri table.
• Color Parameters
• Yarn Carrier Presettings

Not for BMS!

Exclude from Clamping (YG:n!;)

With the check box enabled, the yarn carrier will not be clamped but moved to the '!' position.

Only ADF!

İplik besleme cihazları

If working with feed wheels is activated in the machine attributes, you can assign a group to the selected yarn carrier here.

The creating and managing of the groups takes place in the İplik besleme cihazlarını gruplandır tab

• Group Feed Wheels Tab

Grup

Assign a feed wheel group to the yarn carrier.
All groups previously created in the İplik besleme cihazlarını gruplandır tab are available for selection.

Tür

Shows the feed wheel type of the selected group.

You set the feed wheel type in the İplik besleme cihazlarını gruplandır tab.

YLC

With İplik uzunluğu kontrolü enabled in Yapılandırma -> Diğer ayarlar, you can assign the corresponding measuring wheel to each yarn carrier.

• Further Settings tab

Ölçüm çarkı

Select the corresponding measuring wheel for the yarn carrier.