General settings

The following specifications serve only as information about the yarn type.
It has no effect on the visual presentation of the yarn in the fabric view.

Ad

Enter a name for the yarn.

Birleşim

Describe the composition of the yarn.

Üretici

Enter the manufacturer of the yarn.

Yorum

Enter a comment.

İplik kalınlığı

Enter the yarn thickness and the corresponding unit of measure.

The following specifications serve the visual presentation of the yarn in the fabric view:

Büküm

Enter the twist and the direction of the twist (S or Z).

The larger the value the stronger is the yarn twisted.
Maximum: 200

İlmek geometrisi

Select the stitch geometry between Version 1 and Version 2.

  • Version 1:
    • Activate Tekdüzen ilmek geometrisi .
    • - or -
    • Specify the specific stitch geometry at the needle loop, needle legs and transition, both inside and outside.
  • Version 2:
    • Tekdüzen ilmek geometrisi is active automatically.
    • Specify the core geometry.

İlmek geometrisi %

The stitch geometry determines the yarn thickness.
This value affects the entire stitch uniformly.
Maximum: 300

  • If Tekdüzen ilmek geometrisi is switched off, then the yarn thickness can be defined differently for the different areas of the stitch.
  • But if the İlmek geometrisi % value is modified after, then all areas are adapted to this value.

Tekdüzen ilmek geometrisi

The İlmek geometrisi % value affects the entire stitch uniformly.

Only available with İlmek geometrisi Version 1.

Tekdüzen ilmek geometrisi

The yarn thickness can be defined differently for the following areas of the stitch:

Only available with İlmek geometrisi Version 1.

İlmek başı, orta, dış

Enter the yarn thickness for this area

Maximum: 300

İlmek başı, orta, iç

Enter the yarn thickness for this area

Maximum: 300

Geçiş, bacaktan başa, dış

Enter the yarn thickness for this area

Maximum: 300

Geçiş, bacaktan başa, iç

Enter the yarn thickness for this area

Maximum: 300

İlmek bacağı, orta, dış

Enter the yarn thickness for this area

Maximum: 300

İlmek bacağı, orta, iç

Enter the yarn thickness for this area

Maximum: 300

Çekirdek geometrisi %

The core geometry does not determine the yarn thickness, but the route of the yarn in the stitch.

  • With 0%, the yarns of the stitches run overlapping.
  • With 100% (maximum value), they run side by side.

İplik düzeni

Specify the arrangement of the threads by Manuel or Otomatik:

  • Manuel
    You can move and position the presentation of the yarns in İplik kesiti as desired.
  • Otomatik
    The yarns are displayed evenly side by side.
    The selection between Eşit şekilde and sırayla is offered.
    • Eşit şekilde
      The individual threads of the yarns are displayed alternately.
    • sırayla
      The individual threads of the yarns are displayed connected.

A difference between Eşit şekilde or sırayla is only recognizable if the individual yarns are multithreaded.

Önizleme renklerini kullan


  • The colored presentation of the İplik dokusu corresponds to the preview colors form the İplik kesiti.

  • The colored presentation of the İplik dokusu corresponds to the color defined in the preview.