For advanced users: Position the existing shape on Pattern-4

  1. A pattern project with a pattern with colored stripes e.g. Pattern-4 is created.
  2. A shape is present for example from Pattern-1.spf -> Shape_Sleeve.slsf.
    1
    Open the existing pattern project.
    2
    If desired, save the pattern project with a new name e.g. Pattern-4A.
    3
    Adapt the width and height of the pattern to the size of the shape.
    4
    Load existing Shape_Sleeve.slsf shape from Pattern-1.spf.
    5
    Position in the pattern.
    6
    If necessary, open the Mekik görünümü via Mekikler in order to position the yarn carriers on the rails.
    7
    The border fixation can be activated for the yarn carriers, at the same time, when desired.
    8
    Start the Teknik işlem:
  • Show symbol view after Teknik işlem.
    9
    Generate Sintral.
    10
    Start the Sintral Kontrolü.
    11
    Genişlet the knitting program.
  1. A program for the knitting machine will be created: CMS530.Pattern-4A.zip.
  2. Load knitting program into the machine.

: The extracted file CMS530.Pattern-4A.zip can be loaded onto the machine with an USB stick or via Ethernet.