Needle Data (Find)

İğne verileri

Select the needle data in the drop-down menu that are to be searched.

Depending on the selection different settings options are offered.

Değer

Enter a value that is to be searched.

Ters

Inverts the selection of the selected data.

Adds an input line for a new search criterion.

You can define various search criteria at the same time.

Deletes the corresponding input line.

Moves the search criterion to the control columns data.

Only possible with stitch length.
The stitch length can be drawn into the control columns and this way works for complete rows.
The stitch length can also be entered needle-exactly into the pattern and as a result it is processed with the corresponding settings with NPJ.

If the stitch length is selected in the control columns data, then the entry is affected in the control column with Find and Replace.
If the stitch length is selected in the needle data, then the needle-exact entry is affected with Find and Replace.

Ön ilmek uzunluğu (NPv)

Arka ilmek uzunluğu (NP^)

Ön ikinci ilmek sıklığı (NPS)

Arka ikinci ilmek sıklığı (NPS)

Select the value for the stitch length.
All values in use are offered for selection.

When searching for entries of the stitch length in the search area Needle Data, only needle-exact NP entries are searched for.
Not all control columns are taken into account.

With S-machines it is also possible to search for the second stitch tension.

Desen renkleri

Select the pattern color.
All colors in use are offered for selection.

İğne hareketi

Select the İğne hareketi in the drop-down menu.
All needle actions in use are offered for selection.

Yapı modülleri

Select the structure module.

All structure modules that are available in the Modüllertool window, are offered for selection.

Kesilmiş modüller ara

If modules that were partially overwritten can be found in the pattern, then these modules are taken into account and replaced.

Kesilmiş modüller ara

Only complete existent modules are replaced.

This setting does not apply to modules that are cut into by the selection or the shape, but were actually partially overwritten.

Şekil sembolleri

Select the shape symbol or the module type.

If you select a module type, depending on the selection appear additional menus for Yön, Örtme mesafesi and Görüntü .

Diğer iğne hareketleri

Select the symbol for not sinking or devoré.

Şeklin içinde / dışında

Select the symbol for inside or outside shape.

Şekil kenarları

Select the shape edge.
All shape edges in use are offered for selection.

Kalıp İşaretleri

Select the shape marking.
All shape markings in use are offered for selection.