Use Devoré (Overview)

Use Devoré within a pattern:

  1. Only ADF machines
  2. Corresponding cam conversion on a system for the rear needle bed.
    Recommendation: S2
    1
    Activate Devoré for the converted cam box, in the Yapılandırma dialog box -> Makine öznitelikleri tab -> Sistem fonksiyonları section.
    System Functions
    2
    Draw the pattern in the CREATE PLUS with the corresponding needle actions for rear stitch and Motif ipliği arka .
    Needle Actions
    3
    Draw the Devoré (1 sistem) arka symbol into the Sistem işlevi control column.
    System Function
    4
    Define a plating color with two colors for two yarn carriers in the Vanize renkleri tool window.
    Leading yarn carrier feeds the binding thread.
    Following yarn carrier feeds the motif thread.
    Plating colors tool window
    5
    Select the plating offset 1 for the leading yarn carrier and the plating offset 2 for the following yarn carrier.
    The following values in the plating offset table are recommended.
    Leading yarn carrier:
    Insert Position -1.3
    Height -1.0
    Following yarn carrier:
    Insert Position 8.0
    Height 0.0
    Plating Offset (YPI)
    6
    Draw the defined plating color with the Motif ipliği ön needle attribute into the area in the pattern where the knitting technique Devoré is to be used.