Pattern 10: SJ with plating (CMS), Front with 'gore' shape element

Makine

• As desired
• Example for CMS 530 HP W, E7.2 (classification 698)

• Örme tekniği
• Tüm iğneler
• Dolgu elemanları
• any yarn color
• Aktarmalı ön ilmek
• Başlangıç
• Başlama, 1x1 :
• 1 sistem
• Elastomer iplik olmadan
• Koruyucu iplik ile
• Gevşek sıra

Desen projesi

Pattern-10.spf

Çizgi kesimi projesi

Create private lined shape in Desen projesi

• Working with plating colors
• In the design pattern
• At start
• Create new lined shape:
• Yeni çizgi kesimi projesi
• Working with shape element Tiktak

1. Create a pattern project with one pattern.
2. Draw design pattern (basic pattern) SJ structure
3. Create and draw-in plating colors
4. Create private shape with the 'gore' shape element as lined shape in the pattern project
5. Position private shape in the basic pattern.
6. Start the Technical Processing.
7. Generate knitting program (Sintral, Jacquard, Setup).
8. Run the Sintral Check.
9. Load and set up the knitting program on the machine.