Pattern 14: DJ, Front with V-neck

Makine

• As desired
• Example for CMS 530 HP,E3,5.2 (classification 656)

Without Intarsia

With intarsia

• Örme tekniği
• Tüm iğneler
• Dolgu elemanları
• Any yarn color
• Aktarmalı ön ilmek
• Başlangıç
• Başlama, Torba :
• 1 sistem
• Elastomer iplik olmadan
• Koruyucu iplik ile
• Dolu iğne

Desen projesi

Pattern-14.spf

Çizgi kesimi projesi

Create private lined shape in Desen projesi

• Create new lined shape:
• Yeni çizgi kesimi projesi
• different variants of fading-out at the shape edge of DJ fabrics
• Pattern-14A:
• Toggle off with Aktarmalı ön ilmek
  Narrowing width 1 needle
• Pattern-14AA:
• Toggle off with Aktarmalı ön ilmek
  Narrowing width 8 needles
• Pattern-14B:
• Fading-out with Dolu iğne kenar knitting element
  Narrowing width 1 needle
• Pattern-14C:
• Fading-out with Sosis Kenar knitting element
  Narrowing width 1 needle
• Pattern-14D:
• With intarsia
• Fading-out with Dolu iğne kenar knitting element
  Narrowing width 8 needles

1. Create a pattern project with one pattern.
2. Create private shape as lined shape in the pattern project
3. Position private shape in the basic pattern.
4. Start the Technical Processing.
5. Generate knitting program.
   Sintral, Jacquard, Setup
6. Run the Sintral Check.
7. Load and set up the knitting program on the machine.