Needle Actions

织针动作

起头 tab -> 工具窗口 -> 织针动作

In the 织针动作 tool window select the needle actions to draw.

The following symbols are available for selection.

With every needle action with transfer, is the transfer carried out first, when necessary, and then the needle action.

	删除织针动作 / 编织元素符号 Can be selected in addition (with the CTRL key pressed) to a needle action. Only the selected needle action is deleted when drawing. All the other needle actions are retained.
	带翻针前板线圈
	带翻针后板线圈
	带翻针前板集圈
	带翻针后板集圈
	带向前自动翻针浮线
	带向后自动翻针浮线
	浮线
	前板线圈 - 后板线圈
	前板线圈-后板集圈
	前板集圈-后板线圈
	前板集圈 - 后板集圈
	前板线圈
	后板线圈
	前板集圈
	后板集圈
	前板脱圈
	后板脱圈
	前板脱圈-后板脱圈
	前板脱圈-后板沉圈
	前板沉圈 - 后板脱圈
	前板沉圈
	后板沉圈
	前板线圈沉圈/后板沉圈
	带翻针前板分针线圈
	带翻针后板分针线圈
	前板分针
	后板分针线圈
	向后翻针
	选择性向后翻针 The transferring is only carried out when the transfer needle is occupied and when the following needle action does not cancel the transfer.
	向前翻针
	选择性向前翻针 The transferring is only carried out when the transfer needle is occupied and when the following needle action does not cancel the transfer.
	纬纱/带浮线翻针到后板
	纬纱/带浮线翻针到前板
	纬纱 / 向后翻针及准备
	纬纱 / 向前翻针及准备
	纬纱/带浮线前板脱圈
	纬纱/带浮线后板脱圈
	Cast-off in front without dissolving stitches
	Cast-off at rear without dissolving stitches
	Cast-off in front - Cast-off at rear without dissolving stitches
	模型外
	透明 Transparent areas in modules apply the needle actions of the basic fabric when inserting.

其他的

	带向后翻针前板线圈
	带向前翻针后板线圈
	前板线圈 - 带向后翻针后板线圈
	前板线圈 - 带向前翻针后板线圈
	前板线圈 - 带向后翻针后板集圈
	前板集圈-带向前翻针后板线圈
	前板到后辅助针床的翻针
	前辅助针床到后针床选择性翻针
	从后针床向前辅助针床翻针
	前辅助针床到后针床选择性翻针
	从后辅助针床向前针床翻针
	前辅助针床到后针床选择性翻针
	从前辅助针床向后针床翻针
	前辅助针床到后针床选择性翻针
	前板不下压 Can be drawn in addition to 后板不下压 and to needle action Stitch (only BMS) or Tuck. The technical processing controls the selection and removes the 不下压 needle action from invalid combinations.
	后板不下压 Can be drawn in addition to 前板不下压 and to needle action Stitch (only BMS) or Tuck. The technical processing controls the selection and removes the 不下压 needle action from invalid combinations.
	前板花型纱	Devoré Knitting Technique Use Devoré (Overview) FlexPly Knitting Technique
	后板花型纱

When to use 非下压线圈? (only BMS)

Useful with structures with SJ and DJ in a knitting row
Problem without 非下压线圈 :

A common NP position for SJ (about NP12) and DJ (about NP9.0)
The DJ area is accordingly sunk too deep and has to be balanced using the opposite side.
This is not always possible or knit-able depending on the yarn and desired stitch tension.

With 非下压线圈 :

Only in the DJ area it is knitted with 非下压线圈
Normal stitch is knitted in the SJ area.
The stitch length in the DJ area is balanced using the the opposite knitting system. As a result the DJ area is clearly knitted tighter and more reliable.
The loop sinking depth can be adjusted mechanically at the carriage of the BMS.