Usage of Line

Draw with or without attributes

• If you selected cursor attributes, they will be applied to the pattern when drawing.
• If you did not select any cursor attributes, the area will be selected.
  The selected area is available for further editing.

Draw a free line

• Enter a 线宽 value (e.g. 3).
• Select the 打印方向 (e.g. right).
• Set the 间隙 to 0 (zero).
• Select the 自由 option.
• Draw the 线 (e.g. without attributes).
  The measurements of the line (horizontal and vertical length) appear in the tooltip.

Draw a dash line

• Set the 线宽 value(e.g. 1).
• Set the value for 动程 (e.g. 3) and 间隙 (e.g. 2).
• Draw a 线. (with yarn color red e.g.)
  The measurements of the line (horizontal and vertical length) appear in the tooltip.

Draw a line with user defined stepping

• Set the 线宽 value(e.g. 1).
• Set the 间隙 to 0 (zero).
• Select the 用户自定义 option.
• Select the 宽度： (e.g. fix = 3) and the 高度： of the stepping (e.g. fix = 2).
• Draw a 线 with the specified stepping. (with yarn color red e.g.)
  The measurements of the line (horizontal and vertical length) appear in the tooltip.

Draw a line with step angle by the echo mode

• Enter a 线宽 value (e.g. 1).
• Set the 间隙 to 0 (zero).
• Select the 收放针步骤角度 option.
• Select 预显模式画图 .
• Draw the 线 (with yarn color red e.g.)
  After the second click, the echo with the handles appears.
  You can change or move the echo.

• Apply the line to the pattern by ENTER.
  A new line appears with handles for moving and changing.
• You can repeat the procedure as often as desired.