Racking per Stroke

合并横移类型

Make setting for the racking.

对等动程横移类型(UN, U#, N#, U#N)

Allow grouping of technical rows with different racking type to a stroke.

在机头动程内不均衡不同类型横移

Do not allow grouping of technical rows with different racking type to a stroke.

单针床编织时在动程里均衡横移类型

Reduce the running time of the fabric (e.g. Pointelle) on the machine if possible.

Do Not Equalize Racking

The racking of single-bed knitting rows will not be changed.

Equalize Racking With the Same Take-down Values

In case of identical take-down values, the racking of transfer rows will be applied to a neighboring single-bed knitting row if this results in a shorter running time.

Equalize Racking Even With Different Take-down Values

Even in case of different take-down values of both rows, the racking of transfer rows will be applied to the neighboring single-bed knitting row.
The take-down value of the knitting row will be applied to the transfer row.

允许中间横移

Intermediate racking is used where it is possible.
Consecutive transfer rows with different racking are grouped to form one stroke.

If the distance between the both knitting areas is wider than nine inches, then the intermediate racking will be done consecutively by two knitting systems.
With a distance between 1 and 9 inch, one system will be skipped. If this is not possible, then the intermediate racking will be done consecutively by two knitting systems.
With a distance less than one inch the attempt is made to get a stroke optimization by skipping knitting systems.