Step by Step to 'Pattern-14D'
Features of the pattern:
- Double jersey structure
- Shape adopted to DJ:
- Step width for narrowing by 1 needle
- Narrowing width 1 needle (no fully fashion marking)
- Fading-out all shape edges with the 双面平针 边缘 knitting element in the width of 1 needle
Step by Step to 'Pattern-14D'
- Copy of the ‚Pattern-14B‘ pattern is created and renamed.
- Copy of the ‚Shape_Front+V-neck_14B‘ shape is created and renamed.
- The
镜像属性 check box of the Shape Editor is disabled.
- 1
- Allocate the fade-out width and fade-out mode to all the shape lines of the 基本模型 and of the 开领 shape element:
- Fade-out:
- Fade-out content: 双面平针 边缘
- Fade-out width: Value 1
- 2
- In the 模型 tool window select the created shape with LMB.
- 3
- Open the context menu -> 定位模型 -> select Pattern name.
- The shape is floating in the selected basic pattern.
- 4
- Use the shape to draw-in the desired Intarsia motif into the
设计花型.
- 5
- Click the
导纱器 button under 预览 in the 起头 ribbon. - The document window is opened as view and the 导纱器 ribbon appears.
- 6
- Open the dialog box via
显示导纱器. - 7
- If necessary, make the desired settings for allocating yarn carriers or for Intarsia.
- You can use normal yarn carriers
- Knit-in/Knit-out
- Intarsia binding
- 8
- Start the
工艺
处理:
Show symbol view after technical processing. - 9
- Generate
Sintral. - 10
- Start the
Sintral 检验. - 11
-
提取 the knitting program. - A program for the knitting machine will be created: CMS530.Pattern-14D.zip.
- Load knitting program into the machine.
: The extracted file CMS530.Pattern-14D.zip can be loaded onto the machine with an USB stick or via Ethernet.