Optional Features

语言设置 Section

语言选择

Select the language of the user interface.

使用本地帮助系统

Use local or online help system.

打印设置 Section

基本页面布局

Opens the Basic Page Layout dialog box.

Make the basic settings for printing in the dimensioned shape.

新尺寸模型预设置

测量单位 Section

测量单位

Select the measure unit.

厘米 or
英寸

线圈密度单位设定

Enter the reference measure for the stitch density in the set measure unit.

设置收放针
手摇机编织（转）

All values for vertical measures will be set in courses, i.e. 2 stitch rows.
The following settings are available for 手摇机编织（转）.

起头之后先编织后放针

The stepping of the first widening after the start will be calculated the way that widening to the outside will be done first and then the stitch rows upwards will be knitted.

起头之后先放针后编织

The stepping of the first widening after the start will be calculated the way that the stitch rows upwards will be knitted first and then widening to the outside will be done.

大小配置 Section

Select the system from which the size settings in the dimensioned shape are to be displayed.

数字 (36, 38, 40, ...)

The sizes are indicated in digits.

大写字母 (S, M, L, ...)

The sizes are indicated in capital letters.

尺寸标注视图里的模型点偏移 Section

测量单位

Select the measure unit for the calculation of the deviation.

线圈 or
厘米

偏移大于几针时显示：
纵向
横向

Enter the measure of the vertical and horizontal deviation after which a display should occur in the shape.

默认设置

Make the following settings in the 默认设置 section:

By drag-and-drop is available to select the module.

收针

内容

Select narrowing module from the offered options or directly from the Knit Explorer.

宽度

Set the width of the narrowing.

外观

Select the look for narrowing.

下收针

上收针

多步骤收针

内容

Select the module for multi-step narrowing.

外观

Select the look.
下收针 or
上收针

覆盖宽度

Enter cover width.

放针

内容

Select widening module.

宽度

Enter width of the widening module.

多步骤放针

内容

Select the module for multi-step widening.

拷针

内容

Select module for the binding-off.

从此步宽开始

Enter the minimum step width requiring binding-off.

边缘组织

The fading-out can be configured differently for Structure / Intarsia and Jacquard.

结构 / 嵌花

内容

Select module for fading-out with Structure and Intarsia.

宽度

Enter the width for fading-out.

提花 (浮线 / 网眼)

内容

Select module for fading-out with Jacquards.

宽度

Enter the width for fading-out.

模型边缘线圈长度

后

Select the stitch length (NP value) for the rear needle bed.

宽度

Enter the width of the deviated stitch length in the rear of the shape edge.

前

Select the stitch length (NP value) for the front needle bed.

宽度

Enter the width of the deviated stitch length in the front of the shape edge.