Assign the Jacquard Modules to the Jacquard Areas

I. Assign the Jacquard Module:

    1
    Create a row selection via the control column.
    2
    Positioning the cursor in the pattern area.
    3
    Call-up the Selection / Jacquard... context menu.
  1. The Create Jacquard [New Pattern] dialog box appears.

1

Display of the active document window Design Pattern, for which the dialog box is valid.

2

Color Sequence and Stitch Length

Display or edit box for the stitch length per color / rear system

: Depends on the selection under Stitch Length ((5)).

Display of the used colors in the selection in the color sequence from the left

Display or edit box for the stitch length per color / front system

: Depends on the selection under Stitch Length ((5)).

Second Color Sequence

Default setting
The color sequence is the same as in the first pattern row.

Definition of the color sequence for the second pattern row is possible.

: Input panel for the color sequence of the second pattern row

3

Jacquard Module

Displays the selected Jacquard module.

: Position the cursor in the display, to use the LMB to open the Knit Explorer.

Display of the path of the selected directory in the Knit Explorer

Selection list for selecting the desired Jacquard module in the specified directory

Jacquards

4

Colors

Selection list for the knitting sequence of the colors

  • Continuously
  • Minimum per row
  • Minimum per row and column (yarn bridges)

5

Stitch Length

Selection list for the stitch length

  • Of the pattern
  • Used by the module
  • User Defined
    Make presettings at and / or .

6

Picture side

Selecting the desired face of picture of Jacquard

  • Jv: Picture at the Front
  • J^: Picture at the Rear
  • Jv^: Picture at the Front and Rear
    : Not with all Jacquard modules available

Jacquard Back

7

Smaller width by

Specification in case of Jacquard with yarn bridges, by how many needles the back side is to be narrower then the face of picture

8

Move horizontally by

Specification by needles for shifting the Jacquard horizontally

9

Create Jacquard

The presets made in the dialog box will be applied to the pattern.

    4
    Make the desired presets in the Create Jacquard [New Pattern] dialog box.
    5
    Apply the presets to the pattern with the Create Jacquard button.
    6
    Continue:
    Create the next selection for a new Jacquard area.
    - or -
    Exit working in the dialog box by Close.
  1. The different Jacquards are displayed with different symbols in the pattern.

II. Changing the default settings for Block Jacquard:

: A module for net pick-up and net ending are assigned by default to each pattern in the Pattern Project for Block Jacquard.

Possibilities for changing the module allocation: