Setup Data

Call up the Start tab -> Parameter group -> Setup Data button.

Select the section where you want to make the settings.

Depending on the properties of the selected machine, different sections are available.

The different tabs of the selected section will be displayed.

Open Second View
Opens a second view of the Setup Data.

Zoom
Set the display size of the tabs

The following sections are available for selection in the Setup Data:

Take-down	Show the table with WM- values. Take-down (Setup data)
Yarn Carriers	Show table with YC/YCI values for direct and indirect yarn carrier correction. Yarn carrier (Setup data)
Stitch Length	Show the table with NP values. Stitch length (setup data)
Speed	Show the table with MSEC values. Speed (Setup data)
Cycle Counters	Display table with cycle counters (RS). Cycle counter (Setup data)
Racking	Show racking corrections (VCI). Racking (Setup data)
Presser Foot	Display table with correction values for presser feet. Presser foot (Setup data) This tab only appears if a machine with presser feet is selected.
Feed Wheels	Display the table with the settings of the feed wheels. Feed wheels (Setup data) This tab only appears when an electronic feed wheel was selected in the Configuration dialog box, in the Machine Attributes tab.
Yarn Length	Display the table with the settings for the measuring wheels. Yarn length (Setup data)
Comment	Enter a comment to the Setup entries. Comment (Setup data)
Sintral	Show the table of Sintral functions and instructions. Function call Sintral Instruction / PRINT Sintral Function
Stitch Density	Show stitch density table. Stitch Density
Colors	Display Colors tool window. Pattern Colors