Correction Values

For every entry of the upper table, enter the desired correction value for the yarn carrier in this table.

Y

Yarn Carrier (1-8, 1A-8D)

Ka

Yarn carrier correction value (left) for not swiveled yarn carrier if the yarn carrier is positioned within the fabric.

Value range: -120 to 120
Step width: 0.5=1/32 inch=0.8 mm

Kb

Yarn carrier correction value (right) for not swiveled yarn carrier if the yarn carrier is positioned within the fabric.

Value range: -120 to 120
Step width: 0.5=1/32 inch=0.8 mm

K<I>a

Intarsia yarn carrier correction value (left) for swiveled yarn carrier.

Value range: -120 to 120
Step width: 0.5=1/32 inch=0.8 mm

K<I>b

Intarsia yarn carrier correction value (right) for swiveled yarn carrier.

Value range: -120 to 120
Step width: 0.5=1/32 inch=0.8 mm

MSEC

Carriage speed if this yarn carrier is used.

Especially helpful for technical fabrics.

V

Reduced carriage speed from the carriage reversal point until the area of use of the yarn carrier is reached.

Reduce carriage speed (n) for yarn carrier (n = 0..3). The speed is reduced to 75% from carriage reversal point until achievement of the operating range of the yarn carrier. Then it can be chosen between the following possibilities:

  • 1 = Acceleration up to 100%
  • 2 = Braking down to 50%, maintain speed over a fabric width of 2 inches, acceleration up to 100%
  • 3 = Braking down to 50%, maintain speed over a fabric width of 5 inches, acceleration up to 100%
  • 0 = Deactivation of yarn carrier-specific carriage speed

F

Automatic, system-independent staggering of the yarn carriers following the fabric selvedge √ = disabled

Activate or deactivate the function for the automatic tracking of the yarn carriers in case of shapings.

If the distance between the yarn carrier and the fabric selvedge deviates, the yarn carriers will be moved automatically following the fabric selvedge.

Basis: YDF value of Yarn Carrier Distance from the Fabric Selvedge (YD)

  • Activate the automatic tracking (default setting)
  • Deactivate the automatic tracking
  • For pattern specific subentries:
    • No specification (= Don’t Care)
      Apply value from the previous row.
      The applied value will not be displayed.
    • Call-up the Delete Content context menu or tap the Del button.