Jacquards

Jacquards

Opens the tool window Jacquards.

• Jacquards

Colors

You have three alternatives:

• Continuously
  The Jacquard is created continuously up to the fabric selvedge and is uniform in the entire area.
  Only in this case you can define a second color sequence differently.
• Minimum per row
  The Jacquard is created continuously up to the fabric selvedge and is reduced to the minimum number of colors per row in height.
• Minimum per row and column (yarn bridges)
  The Jacquard is limited to the size of the motif in the width and is reduced to the minimum number of colors per row in height.

Stitch Length

You have three alternatives:

• Of the pattern
  The stitch length from the pattern is applied. The buttons for the stitch lengths remain empty.
  As soon as you select a NP value in one of the buttons then the stitch length switches to User Defined
• Used by the module
  The stitch length from the module is applied. The buttons for the stitch lengths load the NP values of the module.
  As soon as you modify a NP value in one of the buttons then the stitch length switches to User Defined
• User Defined
  Enter your own selection of stitch lengths.

Picture side

You have three alternatives:

• Jv: Picture at the Front
  The Jacquard motif is displayed on the front needle bed.
• J^: Picture at the Rear
  The Jacquard motif is displayed on the rear needle bed.
• Jv^: Picture at the Front and Rear
  The Jacquard motif is displayed on the front and rear needle bed.
  : not possible with all Jacquard modules.