Cycles, piece counters, set fabric edges

In this dialog box, cycle counters (RS), piece counters (ST) and counters for the fabric selvedges can be set. Their values are to be tracked in the Counter output dialog box.
The dialog box is opened with the Set Counter (RS) function in the Countersmenu.
It contains the following parts:

Element	Meaning
Display field	The cycle counters and counters are displayed in the form of a table, ordered based on size.
No. column	Number of the cycle counter or name of the counter
Column Default value	Input field for the value which is to be used when the Sintral Check is started.
Column activated	Cycle counters and counters with activated checkboxes are displayed in the Counter output dialog box. Notice: The checkboxes with blue backgrounds in the Fabric selvedges group cannot be switched. These counters are always displayed in the dialog box.
Cycles and piece counters	The cycle counters and piece counters are contained in this group.
Fabric edges	The counters required for fully fashion knitting are contained in this group. Notice: The counters displayed here are identical with #41 to #44 in the Set counters dialog box.
Display section
Counters in use only	Option field for filtering the display. The cycle counters used in the Sintral program are displayed. Notice: Counters with a blue background in the Activated column are always displayed.
All counters	Option field for the unfiltered display. All cycle counters, piece counters and fabric selvedge counters are displayed.
OK button	The dialog box is closed and the changes applied.

If you close the dialog box with the OK button and a pattern or Sintral program is open, then the settings are saved in a file (file name extension sci) and also used later for this pattern or Sintral program.

Carry out another Sintral Check after any changes.