Draw with structures

Beside the pattern colors, Acciones de la aguja, modules and Partes de muestra are available to draw with.

Needle Actions

To be able to draw with a needle action, you select a drawing tool and a needle action of the Acciones de la aguja tool window.

Needle actions that were already used in the pattern can be picked with the cursor using the F5 key.

To remove the needle action from the cursor, you press the ESC key.

Modules

  1. A design project is open.
    90
    Open the Knit Explorer with F3 or in the ribbon Vista → Knit Explorer.
  1. The Knit Explorer appears in a separate window.
    2. 91
    Select a module from one of the following folders:

    Módulos de estructura
    Basic knitting mode, ribs, Pointelle and building blocks for Aran and cable stitch patterns.

    Partes de muestra
    Subfolder with Jacquard, Pointelle and Aran pattern elements.

    Jacquard
    Technical modules for defining Jacquard areas.

    Comienzos
    Various modules for the fabric start.

    Fully Fashion
    Modules for shaped knitwear.
    For example narrowing, widening, binding-off and hiding modules
  2. Due to your selection the modules is automatically attached to the cursor.
    3. 92
    Draw a module in the pattern using the cursor.
    93
    When you don't need the module anymore, press ESC.

Only after having created or imported a pattern element you will be able to draw with a pattern element.

Generate pattern element:

  1. A design project is open.
    94
    Select the specific area of your pattern, which you want to save as pattern element.
    95
    Click on your selection in the pattern with the right mouse pattern.
  1. The context menu appears:
    2. 96
    Select the function Selección Crear parte de muestra... .
  2. The pattern element was created and appears in the Partes de muestra tool window.
    3. 97
    Select the pattern element and position it in the pattern.

Import Pattern Element:

  1. A design project is open.
  2. A (*.spef) Stoll Pattern Element file is available.
    98
    Click on the Partes de muestra tool window with the right mouse button.
  1. The context menu appears.
    2. 99
    Select the Importar parte de muestra... function.
  2. The Open dialog window appears.
    3. 100
    Select your SPEF file
    101
    Confirm the selection by click on Open
  3. The pattern element appears in the tool window.
    4. 102
    Select the pattern element and position it in the pattern.