Correction Values

For every entry of the upper table, enter the desired correction value for the yarn carrier in this table.

Y

Guiahilos (1-8, 1A-8D)

Ka

Valor de corrección de guiahilos (izquierdo) para guiahilos no basculado cuando el guiahilos está parado dentro del tejido.

Value range: -120 to 120
Step width: 0.5=1/32 inch=0.8 mm

Kb

Valor de corrección de guiahilos (derecho) para guiahilos no basculado cuando el guiahilos está parado dentro del tejido.

Value range: -120 to 120
Step width: 0.5=1/32 inch=0.8 mm

K<I>a

Valor de corrección de guiahilos (izquierdo) para guiahilos basculado.

Value range: -120 to 120
Step width: 0.5=1/32 inch=0.8 mm

K<I>b

Valor de corrección de guiahilos (derecho) para guiahilos basculado.

Value range: -120 to 120
Step width: 0.5=1/32 inch=0.8 mm

MSEC

Velocidad del carro al insertar este guiahilos.

Especially helpful for technical fabrics.

V

Velocidad del carro reducida desde el reenvío hasta alcanzar el sector de utilización del guiahilos.

Reduce carriage speed (n) for yarn carrier (n = 0..3). The speed is reduced to 75% from carriage reversal point until achievement of the operating range of the yarn carrier. Then it can be chosen between the following possibilities:

  • 1 = Acceleration up to 100%
  • 2 = Braking down to 50%, maintain speed over a fabric width of 2 inches, acceleration up to 100%
  • 3 = Braking down to 50%, maintain speed over a fabric width of 5 inches, acceleration up to 100%
  • 0 = Deactivation of yarn carrier-specific carriage speed

F

Seguimiento de guiahilos automático e independiente del sistema en el borde de tejido √ = ausschalten

Activate or deactivate the function for the automatic tracking of the yarn carriers in case of shapings.

If the distance between the yarn carrier and the fabric selvedge deviates, the yarn carriers will be moved automatically following the fabric selvedge.

Basis: YDF value of Yarn Carrier Distance from the Fabric Selvedge (YD)

  • Activate the automatic tracking (default setting)
  • Deactivate the automatic tracking
  • For pattern specific subentries:
    • No specification (= Don’t Care)
      Apply value from the previous row.
      The applied value will not be displayed.
    • Call-up the Eliminar contenido context menu or tap the Del button.