Comb / Cast-off fabric piece BMS

Utilizar Peine / Desprender pieza de tisaje (en todo el proyecto)

All patterns in the project are knitted with comb start or cast-off fabric piece.

This setting applies to all patterns in the project.
All knitting programs in the knitting order for the machine need the same yarn carrier home position.

Peine

The pattern is knitted with comb usage.

Desprender pieza de tisaje

The pattern is knitted with cast-off fabric piece.

Before the start, the previous fabric is cast-off and the new fabric is started with belt take-down.

Posicionar la muestra hacia los ganchos del peine

The pattern is positioned optimally in relation to the comb hooks.

The comb thread insertion is widened a bit when necessary to ensure an optimal hook-in of the comb hooks.

BMS machines have a comb take-down with reduced comb hook. That is why this function is available.

Recognizable in the Seleccionar la máquina dialog box General section by Anotación:.

Hilo del peine / Desprender

Execute comb thread or cast-off using:

• Módulo
• Función Sintral

Módulo

Select module.

• For 1 pieza
• For 2 piezas

1 pieza

Select module for the cast-off for single piece knitting.

The suitable module is determined and applied by setting to Automático.

Modules of the module group Desprender pieza de tisaje, Estirador de banda -> Stoll

2 piezas

Select module for the cast-off for two piece knitting.

The suitable module is determined and applied by setting to Automático.

Module group Desprender pieza de tisaje, Estirador de banda > Stoll

Función Sintral

Execute cast-off via Sintral function.

Select Sintral function.