Properties of the module
Make the following settings in the Propiedades dialog box of the module:
If you pass over the thumbnail with the mouse the following buttons appear:
|
Restablecer imagen |
Resets the image to the last status. |
|
Imagen diferente... |
Opens the Explorer where a new image file for the thumbnail can be selected and loaded. |
|
Nombre |
Enter the designation of the knitting element. |
|
Técnica de tisaje |
Select knitting technique for which this knitting element can be used. |
|
Tipo de elemento de tisaje |
Displays the knitting element type. The knitting element type points to the use. Specific situations only allow specific knitting element types. |
|
Subtipo de elemento de tisaje |
Select knitting element sub-type.
|
|
|
This knitting element is a multi gauge module. |
|
Color del elemento de tisaje |
The available variants are displayed.
Todas las agujas A color can be selected for every variant. |
|
Pasadas de muestra |
Height of the knitting element by Pasadas de muestra. |
|
Pasadas técnicas |
Height of the knitting element by Pasadas técnicas. |
|
Anchura [agujas] |
Shows the width of the knitting element by needles. |
The selection is available only for technical and Jacquard modules. Both technical as well as Jacquard modules contain various variants that are offered in the sub-types.
|
Historial |
Elementos del historial La creación inicial y las últimas cuatro modificaciones son enumeradas en el historial. |
|
Comentario |
Enter a comment about the knitting element. |
|
Columnas de control |
Opciones para las columnas de control Opciones no permitidas suprimen la correspondiente función en las columnas de control en el sector de este elemento de tisaje. |
|
|
1x1 transfer is allowed inside of the knitting element. |
|
|
Surroundings transfer is allowed inside of the knitting element. |
|
|
Cast off and transfer can be combined inside of the knitting element. |