Behavior (MSECn)
Different carriage speeds can be entered for different knitting situations. The indirect carriage speed only becomes effective when it is slower than the normal speed.
In the Comportement (MSECn) section, in the lower part of the tool window, you make the following settings:
Comportement (MSECn) Correction data of (pattern name)
Pour nœuds (MSECK)
|
Valeur [0.00 = ML] |
Enter carriage speed with small knots. Value range: 0.05 to 1.20 |
|
Nombre de rangées |
Enter number of rows across which the entered carriage speed should be active. Value range: 0 to 99 |
|
Commentaire |
Enter a comment. |
pour pince (MSECC)
|
Value |
Enter carriage speed that is applied outside the needle bed when the yarn carrier is brought in the clamp or taken out of the clamp. Value range: 0.05 to 0.50 |
|
Commentaire |
Enter a comment. |
Pour Flexible Stitch (MSECNPJ)
|
|
Carriage speed for working with flexible stitch is active. |
|
Value |
Enter carriage speed. Value range: 0.05 to 1.20 |
|
Commentaire |
Enter a comment. |
Pour Intarsia (MSECI)
|
Value |
Enter carriage speed for working with Intarsia yarn carriers. Value range: 0.05 to 1.00 With CMS C: Value range: 0.05 to 0.70 |
|
Commentaire |
Enter a comment. |