Correction Values (ADF)

Y

Yarn carriers (1A-16B)

Ka

KIa

Correction value for yarn carrier (on the left) if the autarkic yarn carrier is positioned outside its own color field.

Value range: -120 to 120
Step width: 0.5=1/32 inch=0.8 mm

Kb

KIb

Correction value for yarn carrier (on the right) if the autarkic yarn carrier is positioned outside its own color field.

Value range: -120 to 120
Step width: 0.5=1/32 inch=0.8 mm

K<I>a

Correction value for the yarn carrier (on the left) if the autarkic yarn carrier is positioned in its own color field.

Value range: -120 to 120
Step width: 0.5=1/32 inch=0.8 mm

K<I>b

Correction value for the yarn carrier (on the right) if the autarkic yarn carrier is positioned in its own color field.

Value range: -120 to 120
Step width: 0.5=1/32 inch=0.8 mm

<- -> +/- [mm]

Correction of insertion position for autarkic yarn carriers ( ADF )

• Positive value: following yarn carrier
• Negative value: leading yarn carrier

Value range: -100 to 100
Step width: 0.1 mm

YPI and YCI determine the values of insertion position and insertion angle of the autarkic yarn carriers.

These values will be added up to the corresponding maximum at the respective knitting situation.

Table entries (plating offset)

^ v +/- [mm]

Correction of the insertion angle for autarkic yarn carriers (ADF)

• Positive value: Steeper yarn angle
• Negative value: Flatter yarn angle

Value range: -2.0 to 5.0
Step width: 0.1 mm

MSEC

Vitesse du chariot, lorsque ce guide-fil est utilisé.

Especially helpful for technical fabrics.

V

Vitesse du chariot du renvoi du chariot réduite jusqu'à la zone d'insertion du guide-fil.

Reduce carriage speed (n) for yarn carrier (n = 0..3). The speed is reduced to 75% from carriage reversal point until achievement of the operating range of the yarn carrier. Then it can be chosen between the following possibilities:

• 1 = Acceleration up to 100%
• 2 = Braking down to 50%, maintain speed over a fabric width of 2 inches, acceleration up to 100%
• 3 = Braking down to 50%, maintain speed over a fabric width of 5 inches, acceleration up to 100%
• 0 = Deactivation of yarn carrier-specific carriage speed

^+/-[mm]

Correction de la "position haute" pour les guide-fils autarciques

Default : 0 mm

Value range: -2.0 to 5.0
Step width: 0.1 mm

v+/-[mm]

Correction de la "position basse" pour les guide-fils autarciques

Default : 0 mm

Value range: -2.0 to 5.0
Step width: 0.1 mm

A-MSEC

Vitesse de guide-fil maximale pour une course autarcique

Default : 2.0 meters/second

Value range: 0.05 to 2.0
Step width: 0.05

F

Les guide-fils suivent automatiquement et indépendamment des systèmes à la lisière du tricot √ = éteindre

Activate or deactivate the function for the automatic tracking of the yarn carriers in case of shapings.

If the distance between the yarn carrier and the fabric selvedge deviates, the yarn carriers will be moved automatically following the fabric selvedge.

Basis: YDF value of Yarn Carrier Distance from the Fabric Selvedge (YD)

• Activate the automatic tracking (default setting)
• Deactivate the automatic tracking
• For pattern specific subentries:
• No specification (= Don’t Care)
  Apply value from the previous row.
  The applied value will not be displayed.
• Call-up the Supprimer le contenu context menu or tap the Del button.