Needle Data (Replace / Exchange)

Données d'aiguilles

Select the needle data in the drop-down menu that are to be inserted.

Depending on the selection different settings options are offered.

Valeur

Enter a value that is to be inserted.

Adds an input line for a new criterion for insert.

You can define several criteria for insert simultaneously.

Deletes the corresponding input line.

Moves the criterion for insert to the control columns data.

Only possible with stitch length.

• The stitch length can be drawn into the control columns.
• The entry works for complete rows.
• The entry is found in the control column with Find and Replace.
• The stitch length can be entered exactly to the needle in the pattern.
• The entry will be worked with NPJ in case of the appropriate settings.
• The entry is found exactly at the needle with Find and Replace.

Longueur de la maille avant (NPv)

Longueur de la maille arrière (NP^)

Deuxième serre avant (NPS)

Deuxième serre arrière (NPS)

Select the value for the stitch length.
All entries that are defined in the Données Setup as Par défaut are offered for selection.

With the Échanger settings only the data in use in the pattern is available for selection.

When replacing the stitch length in the area Needle Data, only needle-exact NP entries are inserted.
Not all control columns are taken into account.

With S-machines it is also possible to replace the second stitch tension.

Couleurs de dessin

Select the pattern color.
All colors from the Couleurs de dessin tool window are offered for selection.

With the Échanger settings only the data in use in the pattern is available for selection.

Action de l'aiguille

Select the needle action.
All needle actions from the Actions de l'aiguilletool window, except the symbols for not sinking and devoré, are offered for selection.

With the Échanger settings only the data in use in the pattern is available for selection.

Modules de structure

Select the structure module.

All structure modules that are available in the Modulestool window, are offered directly for selection in the drop-down menu.

You can also select any desired knitting element from the Knit Explorer.
Scroll all the way down in the drop-down menu and click on the option:
Sélectionner l'élément de tricotage par un autre chemin d'accès...

In the dialog box select the path and the desired module.

Décalage du début
X: Y:

Calculation of the position of the modules in the application area:

• Décalage du début X and Y at 0 each:
• Starting position of the application area at column 1 and row 1
• The value of X : moves the positioning of the modules horizontally.
• The value of Y : moves the positioning of the modules vertically.

Remplacer multiple

Insert the modules only once or multiple times into the area for insert.

Icônes de forme

Select the shape symbol or the module type.

If you select a module type, depending on the selection appear additional menus for Direction, Largeur de rapprochement and Aspect .

Autres actions de l'aiguille

Select the symbol for Ne pas abattre or Devoré.

À l'intérieur / à l'extérieur de la forme.

Select the symbol for inside or outside shape.

Lisières de forme

Select the shape edge.
All available entries in the Lisières de forme tool window are offered for selection.

Marquages de forme

Select the shape marking.
All available entries in the Marquages de forme tool window are offered for selection.