Line Functions and Fade-out Edges

In the Proprietà della linea dialog you can determine the different functions.

Line Functions

Under functions you'll find the following functions in the drop-down list box:

• Individua automaticamente
• The function is automatically determined by the software based on the line curve.
• Senza funzione
• The setting applies especially to lines that don't have any special technical function for implementation.
• Horizontal lines
• Vertical lines
• Diminuzione
• A narrowing module is inserted.
• Select the narrowing module in the drop-down list box.
• Define the positioning of the narrowing based on the width.
• Aumento
• A widening module is inserted.
• Select the widening module in the drop-down list box.
• Define the positioning of the widening based on the width.
• Diminuzione a parecchi stadi
• At the shape line is carried out a multi-step narrowing.
• Aumento a più gradini
• At the shape line is carried out a multi-step widening.
• Rimagliatura
• The line section of your shape is bind-off.
• Tassello
• The gore is inserted according to the outline.

NOTA! You can transfer the adapted functions onto a mirrored line with a simple click on the 'Apply attributes for mirrored line' button.

• Dissolvenza
• Fully Fashion shapes require fade-out edges.
• These areas are automatically blocked for patterning and serve to form safe edges.
• Select the module for the fade-out area in the drop-down list box.