Yarn Carrier Correction (YC/YCI)

YCI

Indice per correzione guidafili (YCI)

Index 0 applies to the entry for YC.

For every entry (YCI) make the setting of the correction values for the yarn carriers in the lower area.

Descrizione

Informativa sull'utilizzo della voce. Qui è possibile immettere un testo.

For every entry of the upper table, enter the desired correction value for the yarn carrier in this table.

Y

Guidafilo (1-8, 1A-8D)

Ka

Valore di correzione del guidafilo (a sinistra) per guidafilo non inclinato, quando quest'ultimo viene arrestato all'interno del tessuto.

Value range: -120 to 120
Step width: 0.5=1/32 inch=0.8 mm

Kb

Valore di correzione del guidafilo (a destra) per guidafilo non inclinato, quando quest'ultimo viene arrestato all'interno del tessuto.

Value range: -120 to 120
Step width: 0.5=1/32 inch=0.8 mm

K<I>a

Valore di correzione del guidafilo (a sinistra) per guidafilo inclinato.

Value range: -120 to 120
Step width: 0.5=1/32 inch=0.8 mm

K<I>b

Valore di correzione del guidafilo (a destra) per guidafilo inclinato.

Value range: -120 to 120
Step width: 0.5=1/32 inch=0.8 mm

MSEC

Velocità del carro quando è applicato questo guidafilo.

Especially helpful for technical fabrics.

V

Velocità ridotta del carro dall'inversione del carro al raggiungimento della zona di applicazione dei guidafili.

Reduce carriage speed (n) for yarn carrier (n = 0..3). The speed is reduced to 75% from carriage reversal point until achievement of the operating range of the yarn carrier. Then it can be chosen between the following possibilities:

  • 1 = Acceleration up to 100%
  • 2 = Braking down to 50%, maintain speed over a fabric width of 2 inches, acceleration up to 100%
  • 3 = Braking down to 50%, maintain speed over a fabric width of 5 inches, acceleration up to 100%
  • 0 = Deactivation of yarn carrier-specific carriage speed

F

Riposizionamento automatico e indipendente dal sistema di guidafili sulla cimosa del telo √ = disabilitare

Activate or deactivate the function for the automatic tracking of the yarn carriers in case of shapings.

If the distance between the yarn carrier and the fabric selvedge deviates, the yarn carriers will be moved automatically following the fabric selvedge.

Basis: YDF value of Yarn Carrier Distance from the Fabric Selvedge (YD)

  • Activate the automatic tracking (default setting)
  • Deactivate the automatic tracking
  • For pattern specific subentries:
    • No specification (= Don’t Care)
      Apply value from the previous row.
      The applied value will not be displayed.
    • Call-up the Elimina il contenuto context menu or tap the Del button.

The following columns are available for ADF machines.

For every entry of the upper table, enter the desired correction value for the yarn carrier in this table.

Y

Yarn carriers (1A-16B)

Ka

KIa

Correction value for yarn carrier (on the left) if the autarkic yarn carrier is positioned outside its own color field.

Value range: -120 to 120
Step width: 0.5=1/32 inch=0.8 mm

Kb

KIb

Correction value for yarn carrier (on the right) if the autarkic yarn carrier is positioned outside its own color field.

Value range: -120 to 120
Step width: 0.5=1/32 inch=0.8 mm

K<I>a

Correction value for the yarn carrier (on the left) if the autarkic yarn carrier is positioned in its own color field.

Value range: -120 to 120
Step width: 0.5=1/32 inch=0.8 mm

K<I>b

Correction value for the yarn carrier (on the right) if the autarkic yarn carrier is positioned in its own color field.

Value range: -120 to 120
Step width: 0.5=1/32 inch=0.8 mm

<- -> +/- [mm]

Correction of insertion position for autarkic yarn carriers ( ADF )

  • Positive value: following yarn carrier
  • Negative value: leading yarn carrier

Value range: -100 to 100
Step width: 0.1 mm

^ v +/- [mm]

Correction of the insertion angle for autarkic yarn carriers (ADF)

  • Positive value: Steeper yarn angle
  • Negative value: Flatter yarn angle

Value range: -2.0 to 5.0
Step width: 0.1 mm

MSEC

Velocità del carro quando è applicato questo guidafilo.

Especially helpful for technical fabrics.

V

Velocità ridotta del carro dall'inversione del carro al raggiungimento della zona di applicazione dei guidafili.

Reduce carriage speed (n) for yarn carrier (n = 0..3). The speed is reduced to 75% from carriage reversal point until achievement of the operating range of the yarn carrier. Then it can be chosen between the following possibilities:

  • 1 = Acceleration up to 100%
  • 2 = Braking down to 50%, maintain speed over a fabric width of 2 inches, acceleration up to 100%
  • 3 = Braking down to 50%, maintain speed over a fabric width of 5 inches, acceleration up to 100%
  • 0 = Deactivation of yarn carrier-specific carriage speed

^+/-[mm]

Correzione per la "Posizione in alto" per guidafili autonomi

Default: 0 mm

Value range: -2.0 to 5.0
Step width: 0.1 mm

v+/-[mm]

Correzione per la "Posizione in basso" per guidafili autonomi

Default: 0 mm

Value range: -2.0 to 5.0
Step width: 0.1 mm

A-MSEC

Velocità massima del guidafilo con corsa autonoma

Default: 2.0 meters/second

Value range: 0.05 to 2.0
Step width: 0.05

F

Riposizionamento automatico e indipendente dal sistema di guidafili sulla cimosa del telo √ = disabilitare

Activate or deactivate the function for the automatic tracking of the yarn carriers in case of shapings.

If the distance between the yarn carrier and the fabric selvedge deviates, the yarn carriers will be moved automatically following the fabric selvedge.

Basis: YDF value of Yarn Carrier Distance from the Fabric Selvedge (YD)

  • Activate the automatic tracking (default setting)
  • Deactivate the automatic tracking
  • For pattern specific subentries:
    • No specification (= Don’t Care)
      Apply value from the previous row.
      The applied value will not be displayed.
    • Call-up the Elimina il contenuto context menu or tap the Del button.