Example: Structure module with connecting points with repetition

Create structure module with connecting points and repetition:

1

Open the Yeni örme elemanı dialog box with Yeni örme elemanı.
- or -
In the Örme elemanları tool window / select the Yeni modül... context menu.

2

Make the following settings:

• Örme tekniği
• Tüm iğneler
• Örme elemanı tipi :
• Yapı modülü
• Dolgu elemanları
• No yarn color / magazine color or yarn carrier color
• No Needle Action
• Boyut [ilmekler]
• Genişlik : fix width
• Yükseklik : even-numbered or odd-numbered

1

Close the dialog box with Tamam.

1. The Knitting Element Editor is opened.

2

Select the İğne hareketleri / renkler tab.

3

In the drawing canvas, in the technical rows, draw the desired structure with the knitting needle action.

2. The design rows are generated automatically and not displayed.

4

If necessary, select a color for drawing.

• Without color:
  No allocation of a yarn carrier, i.e. color of the design pattern is used
• With color:
  allocation of a yarn carrier, i.e. the used color is applied to the design pattern.
  : If desired, adapt this design row to the color of the structure module.

1

Insert an empty column on the left and right side of the structure, if desired.

1. The columns don't have any needle action.

2

Overwrite these columns with Transparan.

3

Select the Kumanda tab.

4

Select the icon and draw it into the technical rows of knitting in and out.
Uygulanan sıralardaki iğne ile ilgili semboller section -> Bağlantı özelliği
: Not into the design rows!

5

If desired, allocate any desired color to the icon of the Tanımlama renkleri section.
: No effect on the development, only for a better overview.

6

Select the Sonraki tekrarsymbol.
Uygulanan sıralardaki iğne ile ilgili semboller section → Tekrarlar

7

Define the repeating cycle related to columns by the selected icon.

8

Enter the desired control column data in the technical rows:

• Stitch Length
• Fabric Take-down
• Cycle
• Carriage Direction
• No entry of a carriage direction:
  The knitting element is independent of the carriage stroke and can be entered on any desired pattern row of the Tasarım deseni.
• Entry of a carriage direction:
  The knitting element depends on the carriage stroke and can must be entered on the corresponding pattern row of the Tasarım deseni.
  : All technical rows must have a preset carriage direction.
• etc.

1

If desired, apply the control column data from the technical rows to the design rows with the Kumanda sütunları button activated.

2

Select technical rows for grouping.

3

Group the selected rows with the CTRL + G keys.

4

Check the knitting element with Kontrol et regarding correct entries in the knitting element.

5

If necessary, in case of a knitting element already used in the design pattern, apply the changes to the basic pattern with the Uygula button.

6

Close the Yeni örme elemanı tool window with .

1. The knitting element is saved.

7

Select a knitting element.

8

Position the cursor in the Tasarım deseni.

2. Make both of the following steps in order to insert the knitting element with repetition into the pattern.
   
   Tekrar öğesi ile çizim - Büyüklük ayarını başlat - Adım 1 / 2 :
   İğne alanına tek bir tıklatma ile tekrar büyüklük ayarını başlatın. Veya <Ctrl> + <Alt> ve bir fare hareketi ile.
   
   Tekrar öğesi ile çizim - Büyüklük ayarını bitir - Adım 2 / 2:
   Fare ile tekrar tıklayarak büyüklük ayarını sonlandırın.

 

Examples for knitting element with a connecting point and repetitions

Odd-numbered quantity of technical rows in height
Example 1
Example 2	: In this example, you have to define the repeating column next to the connecting attribute by Sonraki tekrar symbol.
Even-numbered quantity of technical rows in height
Example 1