Example 3 : Create Color Arrangements Using Different Weft Yarn Carriers

Color Arrangement 1+2: Create half milano with weft yarn and weft yarn presser foot to use a Qw weft yarn carrier:

  1. Design Pattern is created.
    1
    Select the desired rows in the Sıra control column.
    2
    Position the cursor in the pattern area.
    3
    Call up the Seçimden oluştur / Color Arrangement context menu.
    - or -
    Click directly the button in the ribbon.
  1. The Color Arrangement Editor will be opened.
    2. 4
    Create a plating color in the Vanize renkleri tool window for the weft yarn (A) and following knitting (B).
    5
    Allocate Qs or Qw to the yarn color in column (A) via the context menu Atkı ipliği.
    6
    Allocate the desired type of presser foot in the context menu of the W bastırıcı ayak column.
    7
    Make the desired entries in the editor with the tools for Color Arrangements from the CA and İğne hareketleri / renkler tabs.
    8
    Therefore, insert one row above each pattern row into the executing area of the Color Arrangement:
    9
    Draw needle action Önde ilmek - Arkada ilmek with the plating color P2 into both of the reference rows.
    10
    Enter the following information into the inserted rows:
    11
    Make entries to the following control columns:

CA1 with weft yarn carrier Qs

CA2 with weft yarn carrier Qw

    12
    Check the generated Color Arrangement on correct entries with the Manuel button.
    : The knitting procedure cannot be checked!
    13
    If necessary, in case of a Color Arrangement already used in the design pattern, apply the changes to the basic pattern with the Uygula button.
    - or -
    Close the tool window with button.
    14
    Close the prompt with the desired button:
    15
    Enter the generated Color Arrangement via the control column into the desired rows of the design pattern.
  1. The Color Arrangement is expanded by the technical processing.

Color Arrangement 3: Create half milano with weft yarn and weft yarn presser foot to use a Qs and Qw weft yarn carrier:

  1. Design Pattern is created.
    1
    Select the desired rows in the Sıra control column.
    2
    Position the cursor in the pattern area.
    3
    Call up the Seçimden oluştur / Color Arrangement context menu.
    - or -
    Click directly the button in the ribbon.
  1. The Color Arrangement Editor will be opened.
    2. 4
    Create a plating color in the Vanize renkleri tool window.
    5
    Allocate type Qs to the yarn color in column (A) via the context menu Atkı ipliği.
    6
    Allocate type Qw to the yarn color in column (B) via the context menu Atkı ipliği.
    7
    Allocate the desired type of presser foot in the context menu of the W bastırıcı ayak column.
    8
    Make the desired entries in the editor with the tools for Color Arrangements from the CA and İğne hareketleri / renkler tabs.
    9
    Therefore, insert one row above each pattern row into the executing area of the Color Arrangement:
    10
    Draw needle action Önde ilmek - Arkada ilmek with the plating color P2 into both of the reference rows.
    11
    Enter the following information into the inserted rows:
    12
    Make entries to the following control columns:

CA3 with weft yarn carrier Qs and Qw

    13
    Check the generated Color Arrangement on correct entries with the Manuel button.
    : The knitting procedure cannot be checked!
    14
    If necessary, in case of a Color Arrangement already used in the design pattern, apply the changes to the basic pattern with the Uygula button.
    - or -
    Close the tool window with button.
    15
    Close the prompt with the desired button:
    16
    Enter the generated Color Arrangement via the control column into the desired rows of the design pattern.
  1. The Color Arrangement is expanded by the technical processing.