Double Bow Plating Yarn Carrier

It is possible to knit color and quality platings with this yarn carrier.

Possible uses

Use for gauges E 5 to E 18 only:

EKC

Not for CMS 502 HP+ (12-fold clamping / cutting)

OKC (component type 002)
CMS 822 (component type 003)
CMS 420 E (Type 579, component type 000)

With older OKC machines (component type 000 and 001) the yarn carrier can also be used:

Machines without clamping and cutting device

CMS 933

CMS 711

CMS 503

CMS 922

 

CMS 502

Machines with motorized clamping and cutting device*

 

CMS 730 T

CMS 530 T

 

CMS 730 S

 

Clamping and cutting of the double bow yarn carrier

When using 16 times clamping / cutting, every other clamping / cutting point has to be deactivated to ensure that both threads are reliably clamped and cut.

Machine

Clamping / Cutting

EKC

Setting: 16/8
Carry out the settings in the Optional Features window.
(System Control Unit --> Restart & Configuration -> Click the İleri button repeatedly until the Seçenekler menu is displayed. Set the quantity of clamping and cutting points on the left and right)

  • OKC (component type 002)
  • CMS 822 (component type 003)
  • CMS 420 E (Type 579, component type 000)

Setting: 2x8

Setting: 2x16/8
Carry out the settings in the Machine Configuration 2 window.
(BootOkc --> Restart and Configuration --> Machine Configuration 2)

Sintral specifications

Command

Explanation

Y-5A:PA;

The yarn carrier 5A will be defined as a double bow yarn carrier.
The specification is important for yarn carrier checking and for clamping / cutting. The command considers the larger width for both yarn carrier tips.

Command valid from V_OKC_001.005.000_STOLL on