Table entries (main take-down)

Make the following settings in this table:

ID

Endeks sütununu sıralar

Show or hide pattern-related values


There are pattern-related values contained in this row that are displayed by clicking on the icon.


This row contains pattern-related values that are displayed below it. By clicking on the icon, the pattern-related values are hidden.


This row is a pattern-related row.

In the context menu of a selected row you can insert a row for pattern-related values of a specific pattern.

İğne yatağı için seçimi gösterir. CTRL ile başka değerleri, diğer tablolardan da, imlecin olduğu yere alabilirsiniz.

WMF/WBF

Endeks (merdane çekimi fonksiyonu) D = Sintral'de direkt değer

Desen

Name of the pattern in case of rows with pattern-related values

  • Sorting of rows with pattern-related values

Color

Endeks rengi Renk değerini değiştirmek için rengin üzerine tıklayın.
Colors in use are marked by .

Şablon STOLL

WM(N)

WMN: Merdane çekim değerinin örgü genişliğine bağımlılığı, iğne sayısına göre değiştirilir. WM: Örgü enine bağlı olarak değil.

WM

Kumaş çekim değeri

WM min

Fabric take-down value for minimum fabric width

Value range: 0 - 31.5

(Useful with Fully Fashion)

If the entry is changed manually, the following marking appears beside the entry.
The technical processing will not change this entry.

WM maks

Fabric take-down value for maximum fabric width

Value range: 0 - 31.5

(Useful with Fully Fashion)

If the entry is changed manually, the following marking appears beside the entry.
The technical processing will not change this entry.

N min

Minimum örgü genişliğindeki iğne sayısı

(Useful with Fully Fashion)

If the entry is changed manually, the following marking appears beside the entry.
The technical processing will not change this entry.

N maks

Maksimum örgü genişliğindeki iğne sayısı

(Useful with Fully Fashion)

If the entry is changed manually, the following marking appears beside the entry.
The technical processing will not change this entry.

WMI

Merdane çekimi pals değeri: Varsayılan = 3

The fabric take-down impulse causes a pre-tensioning of the take-down in the carriage reversal. The WMI value determines the strength of the pre-tensioning.

Value range: 0 - 15

WM^

Kumaş çekiminin ters yönde dönmesi için dönme açı derecesi

The brake of the active take-down system (main take-down or comb take-down) is opened for a maximum of 2.5 seconds.
The take-down roller or the comb take-down turn back by a maximum number of the indicated degrees (depending on the fabric tension and the fabric take-down value).

Value range:
CMS 5xx, 7xx, 8xx, CMS ADF-3: 9-60 degrees
CMS 9xx: 9-120 degrees

If either of both the conditions is fulfilled, then the brake is closed again.
The fabric take-down value (n=0-31.5) becomes active again at the carriage return.

WMC

Ana kumaş çekiminin durdurma kontrolünün hassasiyeti için değer: 0= kapatma yok 1= hassas değil 32= çok hassas

Set the speed control of the active take-down system (main take-down or comb take-down) to the value n (0-32). If the take-down system turns too quickly, the machine is stopped.

Value range: 0 - 32

WM+C

Merdane çekimi blokaj kontrolü için örgü sırası sayısı: 0 = kontrol yok

Monitoring of main take-down. If the take-down has not turned after n (0-100) knitting rows, the machine will stop.

Value range: 0 - 100

WMK+C

Tarak kontrolü için örgü sırası sayısı: 0 = kontrol yok

Monitoring of the comb. If the comb has not moved after n (0-100) knitting rows, the machine will stop.

Value range: 0 - 100

Açıklama

Girdinin kullanımı ile ilgili bilgi. Buraya bir metin girebilirsiniz.