Yarn properties (yarn from the image)

Scan a Yarn for the Fabric View

For a better representation of the knitted fabric, you can scan a yarn, create a stitch appearance from it and place it on the fabric view.

For this, proceed as follows:

    1
    Scan a yarn with a conventional scanner and save this image file in any desired folder.
    Recommended yarn length: 30 cm
    It is important that the background of the yarn is black when scanning and that the light reflects the least possible.
    2
    Click on Resimden iplik oluştur... in the Knit Explorer.
  1. The Windows file explorer is opened. There select the scanned image of the yarn.

The newly generated image for yarn appears in the currently opened folder of the Knit Explorer.
That is why you need to be sure to be in the correct folder when you generate the yarn.

Yarn Properties Dialog Box

Open the Yarn Properties dialog box with double click on the newly generated image for yarn.

In the Yarn Properties dialog box, you make the following settings for the background information of the scanned yarn.

Ad

Enter a name for the yarn.

Birleşim

Describe the composition of the yarn.

Üretici

Enter the manufacturer of the yarn.

Yorum

Enter a comment.

İplik kalınlığı

Enter the yarn thickness and the corresponding unit of measure.

İlmek geometrisi %

The stitch geometry determines the yarn thickness. This value affects the entire stitch uniformly.
The maximum value is 300.

If Tekdüzen ilmek geometrisi is switched off, then the yarn thickness can be defined differently for the different areas of the stitch.
But if the İlmek geometrisi % value is modified after, then all areas are adapted to this value.

Taranan ipliğin uzunluğu

Enter the length by cm of the scanned yarn.

Parametre iletişim kutusu

Opens the Parameter dialog box where you make settings for the image of the scanned yarn.

Örgü görünümü

Opens an image with a magnified fabric view.

Preview

Shows a preview of the fabric view with the settings of the scanned yarn.

Dokudaki renkler

The presentation corresponds to the settings of the scanned yarn.

This presentation is displayed in the fabric view, if you activate the İplik dokusu selection in the status bar.
Status Bar of Fabric View

Drag the yarn by drag-and-drop to the fabric view.
The pattern size is shown with the scanned yarn.

If you then make any changes in the yarn properties, then they are displayed in real time in the fabric view.