Multi-piece knitting on machines with and without comb

Rules for two-piece knitting with comb:

For the start 使用牵拉梳（整个项目内） is to be selected.
Do not use width cycles within the pattern
Consider the total width and the distance between the fabrics
The pattern must have a start

Create two piece pattern:

1: Generate new pattern.
- or -
Load the existing pattern as basic pattern.

2: In the tool window 配置 select the tab 编织区域颜色 .

3: Select 多片编织 and enter the distance to the fabric piece center or the distance of the empty space.

4: The 工艺处理 generates data for both fabric pieces automatically.

You can set the yarn carrier allocation in the 导纱器视图 by yourself. Otherwise they are positioned and inserted automatically.

Yarn carriers for the left fabric piece on the left side of the machine
Yarn carriers for the right fabric piece on the right-hand side of the machine.
Exception:
The yarn carrier for the comb thread is used for both pieces.

Rules for two-piece knitting without comb:

使用牵拉梳（整个项目内） is disabled for the start.
Consider the total width and the distance between the fabrics
The pattern must have a start

Create two piece pattern:

1: Generate new pattern.
- or -
Load the existing pattern as basic pattern.

2: In the tool window 配置 select the tab 编织区域颜色 .

3: Enter the number of SEN areas and the distance between them in the SEN section.

4: The 工艺处理 generates data for both fabric pieces automatically.

You can set the yarn carrier allocation for the SEN areas in the 导纱器视图 by yourself. Otherwise they are positioned and inserted automatically.

Yarn carriers for the left fabric piece on the left side of the machine
Yarn carriers for the right fabric piece on the right-hand side of the machine.