Use Devoré (Overview)

Use Devoré within a pattern:

  1. Only ADF machines
  2. Corresponding cam conversion on a system for the rear needle bed.
    Recommendation: S2
    1
    Activate Devoré for the converted cam box, in the 配置 dialog box -> 机器属性 tab -> 系统功能 section.
    System Functions
    2
    Draw the pattern in the CREATE PLUS with the corresponding needle actions for rear stitch and 后板花型纱 .
    Needle Actions
    3
    Draw the 镂空花型（1系统）后板 symbol into the System Function control column.
    System Function
    4
    Define a plating color with two colors for two yarn carriers in the 添纱颜色 tool window.
    Leading yarn carrier feeds the binding thread.
    Following yarn carrier feeds the motif thread.
    Plating colors tool window
    5
    Select the plating offset 1 for the leading yarn carrier and the plating offset 2 for the following yarn carrier.
    The following values in the plating offset table are recommended.
    Leading yarn carrier:
    Insert Position -1.3
    Height -1.0
    Following yarn carrier:
    Insert Position 8.0
    Height 0.0
    Plating Offset (YPI)
    6
    Draw the defined plating color with the 前板花型纱 needle attribute into the area in the pattern where the knitting technique Devoré is to be used.