Control columns
You get quickly and in good overview information on the displayed rows in the control columns of thetechnical view, the Fabric view and the shape view. The data is shown in columns and can be displayed and hidden individually or all together.
In Find and Replace dialog box, you can specify data of the control columns present in the pattern and which are to be replaced by other data.
The dialog box is opened by the function in the menu.
Context menus can be accessed with the right mouse button via some columns, and relevant settings for the rows can be selected here.
The selected settings are assigned to one or more rows with the left mouse button. This cursor function is deactivated again with the Esc key or by selecting another cursor function.
In the pattern row presentation are presented not all the control columns. You can choose between the technical row presentation pattern row presentation
pattern presentation
toolbar. The numbering of the rows is dependent on the type of presentation.
Some displayable data in the control column is only visible after technical processing.
Exception: The modules for the starts and picking-up after pressing-off that are selected when generating a new pattern.
The control column data in the start area will be overwritten when expanding!
Therefore, do not enter data for the start before expanding.
The following control columns are presented in accordance with the machine type:
Additional Information
- Technical row
- Pattern Row
- Sintral / Jacquard
- Knitting Layer
- Stroke
- Carriage Direction
- System Function
- System
- Fabric Take-down, Main Take-down, Auxiliary Take-down, Fabric Sensor
- Belt Take-down (control column)
- Comb, collecting area
- Carriage speed, machine slow, machine stop
- Yarn Length Control
- Function Calls
- Transfer Surrounding
- Multi-system Transferring
- Combine casting-off + transfer
- Separate k&w transferring layers
- Sequence of Technical Rows
- Presser Foot (ADF-W, CMS-W)
- Presser foot (CMS-S)
- Front Holding-down Device, Back Holding-down Device
- Front stitch length, back stitch length
- Stitch length (second stitch tension) in front, Stitch length (second stitch tension) at rear
- Reclaiming in front, Reclaiming at rear
- Cycles
- Border Fixation
- Yarn Carriers
- YDI (Setup2)
- YCI (Setup2)
- Rear-front jacquard selection
- Module Arrangement
- k&w Arrangement
- Color Arrangement
- Swiveling for yarn carriers (control column)
- Intarsia binding (control column)
- No Knitting-out (control column)
- Racking Correction
- Front racking, Rear racking, Additional needle bed racking
- Selection
- Context menu (control columns)
- Display and hide control columns
- Select control columns (dialog box)
- Feed wheel (control column)